0
To wall mount a flat screen tv, you will need a power drill, measuring tape, a level, a pencil, and possibly a stud finder and a screwdriver, and you should really have a wall mount kit as well. A wall mounting kit will come with instructions. You will have to decide before you begin if and how you will hide the cables.
Wiki User
∙ 12y ago
Wiki User
∙ 11y agoYes, as long as you have the correct mounting equipment
Wiki User
∙ 11y agoFlat screen TV wall mount can be purchased virtually everywhere that a flat screen TV is sold. Discount retailers like Walmart carry them, as do electronic stores such as Best Buy.
Wiki User
∙ 10y agoFlat screens are easy to mount on walls because they are leaner. If you hire some professionals you can get the TV mounted quickly without any hassles. However you can also do it yourself.
Wiki User
∙ 12y agoYes, if your TV is a flat screen it can be attached to the wall. I would talk with someone at an electronics store for help on what size though.
Add your answer:
Earn +20 pts
What is a good wall mount support for shelves?
A good wall mount support for shelves is one known as Vitsoe. Wall mounts can be used to put up several different items like flat-screen televisions and huge photographs.
How do you Position your Wii sensor bar if you have a flat screen tv with no table under?
You could tape it to the wall or put it on top of your flat screen. You would just have to stand farther away if you put it on top.
How easy is the Peerless SmartMount ST650S Universal Tilt TV Mount to install Will it put large holes in my wall?
For easy installation the mount is preassembled and includes a Sorted-For-You baffle pack with all screen hardware and security fasteners. It will probably leave a small hole in the wall.
Where would a good place for a 19 inch TV be?
If you are getting a flat panel TV, a great place to put it is to mount it on the wall. If not, you can put it on a TV stand where you want to watch it most, perhaps your sitting room.
Can I put a tv mount on a drwall and timber wall?
Yes, as long as you mount the screws into the studs.
Can a tv wall bracket protect a persons flat screen tv?
Yes they are. You want to make sure that you purchase the appropriate size wall bracket for the size of tv you are wanting to put on the wall. Make sure to read and follow the installation instructions carefully.
What was the flat screen tv invented for?
They look sleak and cooler. Aslo they have more of an ability to be put in different places around the house. And they take up less space because you can hang them on a wall.
Can you put your flat screen DLP TV on your fully covered porch?
no..we cant
Tips on Installing your TV Stand and Mount?
One of the great things about getting a flat screen TV is that you can mount it on your wall to save space. However, this can end up causing you a boatload of problems if you don't know how to properly install the TV stand and mount to your wall. If you are planning on getting a TV stand and mount for your flat screen TV, then make sure you are very careful during the installation. Otherwise, your precious flat screen will be a jumbled mess of busted electronics on the floor. For starters, you need to make sure that you know exactly where the studs are in your wall. Even if you use anchors with your screws, the drywall or paneling in your wall will absolutely not be enough to hold the weight of your television. The best way to find the studs in your wall is to buy a stud finder, but there are some other ways to accomplish this. If you know the distance between the studs in your wall, then you can measure out the stud positions before you set up your TV stand and mount. Otherwise, you can knock on your wall to tell where the studs are-- the knock will sound more hollow the farther it is from the wall stud. Before you get too involved with installation, hammer in a couple test nails to make sure you have the stud. If it takes a lot of force to hammer in the nail, then you're in the right spot. Also, make sure that you test out the total swivel of your TV stand and mount before you install it. Many people will install these mounts completely, then realize that they put it too close to another wall and they have lost a lot of the mobility of the swinging arm. Installing a TV stand an mount is really not a very difficult thing to do, but you do need to take some precautions whenever you do it. These are very simple precautions, and they really just amount to common sense. However, even though it might seem like common sense, you'd be surprised at just how many people completely forget these things.
How to Mount a TV Stand?
There is no doubt that flat screen televisions are extremely popular. This is mainly because flat screen televisions feature outstanding picture quality. In addition, it is possible to easily put them on a TV stand and mount them to your wall.Measure Your TVYou can start by measuring your TV with measuring tape. After you have measured your TV, you can look for areas in your home that offers enough room for your TV. You should also use a stud finder. A stud finder can help you find a stud that allows you to mount your TV on your wall. Without a stud in the wall, you will not be able to mount your television.Take Care of CordsYou should make sure that the spot you pick is relatively close to an outlet. You may need to purchase a cord cover. Cord covers ensure that after you have mounted your TV the cords do not look too cluttered or messy.Attach the Mount to Your TVAfter you have taken care of the cords and after you have picked the right spot for your TV, you need to attach a mount or a TV stand to your TV. Each mount is different. Because of this, it is important for you to read the instructions that are given to you after you purchase the mount. You normally need to purchase screws. In addition, you should have a drill or a screwdriver in order to install the mount to your TV. Many different mounts normally require you to install around two beams to the back of your TV. This allows you to hang your TV to the mount.Attach the Mount to Your WallNow you will need to attach the mount to the area that you picked earlier. However, before you screw the mount to the wall, you should get someone to hold it against the wall. Stand back and make sure that the mount is in the right area and that it looks okay. The mount should be at eye level. Then you will need to mark the perimeters of where the mount will be. You can now screw the mount into the wall. Hang the TV onto the mount. The TV should fit easily due to the beams that you installed earlier.
Is a flat screen the same as a flat panel?
No. Flat panel is when the screen is less than 10 inches deep. That makes them lightweight and easily mounted on a wall. There are 4 kinds: LCD (Liquid Crystal Display,) LED (Light Emitting Diode) LED-LCD (A.K.A. LED-backlit LCD display) and plasma (nothing to put in parenthesis here.) They have always have been used on laptops and desktop computers have switched from CRT, but the first portable computer had a CRT. Flat screen is when it has a CRT with 2 panes of glass in front of it. One acts like a lens to focus the light to all go in the same direction and another piece which is like your window except single pane, completely flat. That means the screen is flat, but the TV is over a foot deep. Flat screens are compatible with all 3 kinds of CRT. Flat screens are the only kind of TV that can easily fool people with the Redneck Flat Screen TV setup
Where do you put electrical behind flat screen tv?
AC power can be placed wherever you want, but you should put it to the right or left of center of the TV's location, so that it will not interfere with the location of the wall bracket. You might also consider running an HDMI line from the same outlet to wherever the surround receiver will be.
