Just until they seat themselves. Then it should be free, or very light drag.
Vti - rear and front disc brake engine b16 15' wheels esi - front disc brake only engine d16 14' wheels
It can hold the brake pad against the rotor disc and cause premature failure and if it gets hot enough from friction, start a fire.
When disc brakes are applied, a caliper squeezes the brake pads against the disc and the wheel slows. When drum brakes are applied, curved shoes located inside the drum are pushed outwards, rubbing against the inside of the drum and slowing the wheel.
You will need to remove the tire and wheel from your 1986 Honda Accord. Remove the brake caliper and the brake spring. The disk brakes will come off. Reverse the process to install the new front disc brakes.
above disc brake, above frame rail
disc brake components
You can get them at almost any Auto Parts Store.
19mm for front and 8mm for rear on 2002-2005 models
The rotor is the disc in the disc brake system.
There are no calipers used with brake drums. Brake drums work with curved brake pads pressing against the inside circular surface of the drum when the brakes are applied. These pads are held in place and pushed by a spring and lever assembly that is mounted to a steel plate attached to the wheel or axle of the car. This plate does not move. Calipers are used with disc brakes to hold the brake pads on both sides of the disc brake and to apply them against the disc when the brakes are applied.
Disc brakes. Ask the auto parts store for OEM brake pads.
the caliper