answersLogoWhite

0

An amplifier and speaker is recommended for most theremins, however, some theremins may provide enough audio output power to directly drive headphones or a speaker. Some commercial theremins have an internal speaker.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Natural Sciences

Can your 40 amp electric stove be use in your new apartment of 20 amp?

If the supply is a 20 amp supply it cannot supply a 40 amp stove, you need a bigger supply or a smaller stove.


How do you install a amp to a almera?

To install an amp in an Almera, you will need to connect the amp's power wire to the car's battery, ground the amp to a metal part of the car's chassis, and connect the amp's remote wire to a source that turns on when the car is started. You will also need to run RCA cables from the head unit to the amp for signal input, as well as speaker wires to connect the amp to the car speakers. It's recommended to consult a professional for the installation to ensure safety and proper functionality.


Can you put a 50 amp beaker in a 60 amp panel?

I've never heard of a 50 amp b-e-a-k-e-r. You can put a 50 amp b-r- e-a-k-e-r in a 60 amp panel; but you can only have an additional 10 amp breaker along with it. You may need to consider adding another larger panel or a separate 50 amp breaker box.


Duplex receptacle circuit given 15 amp breaker 225 amp load?

A 15 amp breaker is not sufficient for a 225 amp load. You would need a breaker that matches the load current, such as a 225 amp breaker. Using a 15 amp breaker for a 225 amp load would cause the breaker to trip immediately due to overcurrent.


How many amp circuit do you need for a 110 volt 1500 watt hot water heater?

For a 1500 watt hot water heater connected to a 110 volt power source, you would need a 13.6 amp circuit. It is recommended to use a 15 amp circuit to provide some safety margin.