If you have a set of box springs you should replace them when you get a new mattress as they wear out. If you have a foundation (rigid platform) and it is in good repair and sits flat you will get just as long a wear out of your new mattress as you will with a new foundation. It will probably void your warranty, but if you bu a decent mattress and take care of it you most likely will have no issues. You should not use a box spring with a bed designed for a foundation as it will wear prematurely. over 90% of the beds made today have foundations. Also a bed designed for a box spring should not have a foundation used on it. The innerspring on a platform and box spring bed are designed differently.
Yes, box springs are recommended with a traditional mattress. The box springs are constructed to support the mattress and to lengthen its life.
No, you do not necessarily need box springs for your mattress. Some mattresses are designed to be used without box springs, such as platform beds or adjustable bases. It ultimately depends on the type of mattress and the support system it requires.
It was recommended on WebMD to place a piece of plywood between the boxspring and mattress. However, you can also try rotating and flipping the mattress. If it is more than ten years old, you will do best to replace it. Box springs do not need to be replaced if you are purchasing a same size mattress. Never use plywood to stiffen a mattress. If it is too soft, the it is worn out. Replacing it is the only solution.
You can put a mattress on the floor and it will be ok to sleep on. Box springs are a unit that allows you to use the matress on a bed. The springs sit on the edges of the bed frame and keep the mattress from falling on the floor. If your bed frame has slats that go across from one side to the other, you can just use a mattress. It won't be as comfortable.
We need a mattress and box springs, old screen taken to the dump in Ocean Isle Beach Friday, Oct. 28. Pat Freund, 910-686-2583
Box springs are not always necessary for a bed, as some mattresses are designed to be used without them. However, box springs can provide additional support and height to the bed. It ultimately depends on the type of mattress and personal preference.
To repair or replace worn out or damaged couch springs, you can purchase replacement springs from a hardware store or online. Remove the old springs by detaching them from the frame and attaching the new ones in their place. If the springs are part of a larger system, you may need to replace the entire system or consult a professional for assistance.
no, you do not need a compression tool to remove or replace them
The mattress laid on it will not be in level. It will be uneven with depressions or may sag to one part of the mattress.Often the weak spring will be soft to press while the other springs will keep the mattress straight and a little strong when pressed.
if you go with original equipment you need to replace either shocks or springs or both with factory specifications. shocks are matched to springs by load capacity and rebound force, you see, if you swap out shocks for race shocks they will be a lot more stiff, you can play with shocks a little but the springs must match the shock specs. an example would be say,you replace your factory springs with racing-lowering springs, but stuck with factory shocks, the car would bounce all over the road cause the springs are much stronger than the damping load the shocks are designed to handle
For a good night’s sleep and maximum comfort, don’t endure sleeping on a lumpy mattress longer than you have to. Try to invest in a high-quality mattress with a high-density, so it has a longer lifespan. Try this site it work for me. ht tps://ya zing. com/deals/dre amclou dsleep/Werock2021 (removed all spaces) sweet dreams
To replace the air springs on an 89 LSC, you will need to access the suspension components located in the rear of the vehicle. Start by supporting the vehicle securely with jack stands and removing the rear wheels. Then, detach the air lines and electrical connections from the air springs. Finally, remove the bolts securing the air springs to the suspension and replace them with the new air springs, making sure to reconnect the air lines and electrical connections.