0
LENR, or low-energy nuclear reactions, remains a controversial and not widely accepted area of research in the field of nuclear physics. While there have been some reported successes in producing excess heat and nuclear reactions at low energies, the scientific community generally requires further experimentation and validation before fully accepting LENR as a reliable energy source.
What else can I help you with?
What word would mean burst of energy?
After decades of wandering in the scientific wilderness, cold fusion may be returning to the land of the acceptable.It's been more than 20 years since esteemed researchers Stanley Pons and Martin Fleischmann electrified the world with news that they'd observed low-energy nuclear reactions, or LENR, at the atomic level that generated excess heat, holding out the promise of "cold fusion" that did not require the blast furnace of nuclear fission as part of the energy-creating process.Cold fusion is, conceivably, a third type of nuclear reaction (after fission and so-called hot fusion) that somehow occurs at relatively low temperatures. When Pons and Fleischmann, two of the world's leading electrochemists at the time, reported in 1989 that their tabletop, experimental apparatus had produced anomalous heat that could only be explained by some sort of a nuclear process, the race to define or explain cold fusion began. Pons and Flesichmann also reported that they'd observed small amounts of nuclear reaction byproducts.However, because the Pons-Fleischmann results couldn't be repeated consistently--and since it was also discovered that they had not, in fact, observed any nuclear reaction byproducts--cold fusion has largely been rejected, and Pons and Fleischmann discredited, by the mainstream scientific community.While there have been sporadic reports of LENR findings of "excess heat"--basically, that "something happened" that defies explanation--there is still no generally accepted theoretical model of cold fusion.[Unlimited Data Sharing, Storage a Flash of Light Away]In fact, the notion of "cold fusion" can be something of a dead end, with virtually no one interested in funding serious research in the effort and reputable scientists leery of ruining their careers by pursuing what some might consider alchemy.Two separate Department of Energy panels (first in 1989 and then again in 2004) largely dismissed the cold fusion theory and recommended against any sort of a new DOE program to adequately study it, although both did indicate that some sort of modest financial support for small experiments might be warranted.Despite all this, the hope that cold fusion somehow works and that clean, abundant, free energy might be just around the corner has been an alluring siren call for a few researchers working quietly in the past two decades. And now, it seems, some relatively interesting players seem at least willing to test the waters to finally determine whether cold fusion is real and can be modeled and tested properly with real equipment…or whether it's just a myth after all.The notion that some big players are showing interest in LENR has set the small community of researchers who have continued to investigate cold fusion buzzing. LENR is real, these researchers claim, even if cold fusion research is almost never published in peer-reviewed scientific journals. In short, they've been asking places like DOE or others to jump in the water with them and see if more than 100 largely unsubstantiated (and non-peer-reviewed) reports of observed excess heat effects by some unexplained interaction of hydrogen or deuterium with metals like nickel, platinum, or palladium mean something.This small community of researchers working with tiny budgets claims that to have made substantial progress in the past few years. But it can't explain the observed effects within the current standard model. And no one can explain how transmuting one material into another at the nuclear level--e.g., nickel nano-powder and hydrogen into copper at low temperatures (freeing up excess energy at the atomic level with no harmful nuclear byproducts or radiation)--is feasible or even possible. But that hasn't stopped the patenting process, and there are a few now that explore LENR systems that use this process in concert with electromagnetic stimulation.But what has inspired hope within this small community are several recent developments: LENR demonstration projects recently initiated at respected places like MIT, the University of Missouri, and the University of Bologna; public presentations by executives at one of the world's largest instrument companies, National Instruments, apparently designed to attract the top LENR researchers into a project to test and quantify observed LENR effects; and a July report from the European Commission's research and development center that LENR at least has sustainable future energy technology potential.But near the top of the cold fusion research community's hit parade are musings from NASA, like the fact that the agency apparently filed two LENR-related patents last year and that a leading NASA scientist has indicated that LENR is real enough to pay attention to and study. Boeing and NASA may even be testing aircraft using LENR or other similar concepts.[How the Mighty Mississippi Beat Back BP Oil Spill]The benefits of LENR would be obvious: It would be green, safe, and carbon-free, capable of cheaply replacing current energy sources. The most common experimental LENR tests use nickel and hydrogen--the most abundant metal and gas on Earth--in a non-combustion process to allegedly form copper plus energy. The promise alone is almost certainly why reputable, big players are at least paying attention now.None of this says that cold fusion is real. None of this means that senior executives at big companies like Boeing or National Instruments or senior officials at federal agencies or departments like NASA, the U.S. Navy, or DOE are willing to commit publicly to spending meaningful taxpayer dollars on cold fusion research. In fact, the Navy reportedly shut down its LENR research in California earlier this year after a news report on its efforts led to unwanted publicity.But it does beg the question: If some big players and research agencies think LENR is real enough to study, test, quantify and even patent, is cold fusion back in the game?
What are the types of mechanical work?
The types of mechanical work include static work, dynamic work, and intensive work. Static work refers to work done without motion, dynamic work involves movement, and intensive work focuses on the internal energy changes within a system.
How does input work and out put work affect the efficiency of a simple machine?
Input work is the work done on a machine, while output work is the work done by the machine. Efficiency of a simple machine is calculated as the ratio of output work to input work. The efficiency of a simple machine is high when the output work is close to the input work, indicating that the machine is converting most of the input work into useful output work.
What formula relates work and power?
The formula that relates work and power is: Power = Work / Time. Power is the rate at which work is done, which is the amount of work done divided by the time it takes to do that work.
The work that the simple machine does is called the work?
the work a machine does is the work output what it takes to do the work is the work input
What word would mean burst of energy?
After decades of wandering in the scientific wilderness, cold fusion may be returning to the land of the acceptable.It's been more than 20 years since esteemed researchers Stanley Pons and Martin Fleischmann electrified the world with news that they'd observed low-energy nuclear reactions, or LENR, at the atomic level that generated excess heat, holding out the promise of "cold fusion" that did not require the blast furnace of nuclear fission as part of the energy-creating process.Cold fusion is, conceivably, a third type of nuclear reaction (after fission and so-called hot fusion) that somehow occurs at relatively low temperatures. When Pons and Fleischmann, two of the world's leading electrochemists at the time, reported in 1989 that their tabletop, experimental apparatus had produced anomalous heat that could only be explained by some sort of a nuclear process, the race to define or explain cold fusion began. Pons and Flesichmann also reported that they'd observed small amounts of nuclear reaction byproducts.However, because the Pons-Fleischmann results couldn't be repeated consistently--and since it was also discovered that they had not, in fact, observed any nuclear reaction byproducts--cold fusion has largely been rejected, and Pons and Fleischmann discredited, by the mainstream scientific community.While there have been sporadic reports of LENR findings of "excess heat"--basically, that "something happened" that defies explanation--there is still no generally accepted theoretical model of cold fusion.[Unlimited Data Sharing, Storage a Flash of Light Away]In fact, the notion of "cold fusion" can be something of a dead end, with virtually no one interested in funding serious research in the effort and reputable scientists leery of ruining their careers by pursuing what some might consider alchemy.Two separate Department of Energy panels (first in 1989 and then again in 2004) largely dismissed the cold fusion theory and recommended against any sort of a new DOE program to adequately study it, although both did indicate that some sort of modest financial support for small experiments might be warranted.Despite all this, the hope that cold fusion somehow works and that clean, abundant, free energy might be just around the corner has been an alluring siren call for a few researchers working quietly in the past two decades. And now, it seems, some relatively interesting players seem at least willing to test the waters to finally determine whether cold fusion is real and can be modeled and tested properly with real equipment…or whether it's just a myth after all.The notion that some big players are showing interest in LENR has set the small community of researchers who have continued to investigate cold fusion buzzing. LENR is real, these researchers claim, even if cold fusion research is almost never published in peer-reviewed scientific journals. In short, they've been asking places like DOE or others to jump in the water with them and see if more than 100 largely unsubstantiated (and non-peer-reviewed) reports of observed excess heat effects by some unexplained interaction of hydrogen or deuterium with metals like nickel, platinum, or palladium mean something.This small community of researchers working with tiny budgets claims that to have made substantial progress in the past few years. But it can't explain the observed effects within the current standard model. And no one can explain how transmuting one material into another at the nuclear level--e.g., nickel nano-powder and hydrogen into copper at low temperatures (freeing up excess energy at the atomic level with no harmful nuclear byproducts or radiation)--is feasible or even possible. But that hasn't stopped the patenting process, and there are a few now that explore LENR systems that use this process in concert with electromagnetic stimulation.But what has inspired hope within this small community are several recent developments: LENR demonstration projects recently initiated at respected places like MIT, the University of Missouri, and the University of Bologna; public presentations by executives at one of the world's largest instrument companies, National Instruments, apparently designed to attract the top LENR researchers into a project to test and quantify observed LENR effects; and a July report from the European Commission's research and development center that LENR at least has sustainable future energy technology potential.But near the top of the cold fusion research community's hit parade are musings from NASA, like the fact that the agency apparently filed two LENR-related patents last year and that a leading NASA scientist has indicated that LENR is real enough to pay attention to and study. Boeing and NASA may even be testing aircraft using LENR or other similar concepts.[How the Mighty Mississippi Beat Back BP Oil Spill]The benefits of LENR would be obvious: It would be green, safe, and carbon-free, capable of cheaply replacing current energy sources. The most common experimental LENR tests use nickel and hydrogen--the most abundant metal and gas on Earth--in a non-combustion process to allegedly form copper plus energy. The promise alone is almost certainly why reputable, big players are at least paying attention now.None of this says that cold fusion is real. None of this means that senior executives at big companies like Boeing or National Instruments or senior officials at federal agencies or departments like NASA, the U.S. Navy, or DOE are willing to commit publicly to spending meaningful taxpayer dollars on cold fusion research. In fact, the Navy reportedly shut down its LENR research in California earlier this year after a news report on its efforts led to unwanted publicity.But it does beg the question: If some big players and research agencies think LENR is real enough to study, test, quantify and even patent, is cold fusion back in the game?
How did African slaves get education?
They got their education by secretly learning it if their master didn't allowed because it was illegal. Sometimes, their masters tought the slave even though it was against the law. By secretly learning it, they could learn it off another slave or steal a book and educate themselves.
If a Mexican were to come and live in the US what do they do here?
Work , Work , Work , Work , Work , Work ! They do what You lazy Americans don't . Mexicans work hard . They do it all !
What is a work calendar?
A calendar at your work, for your work, that has your work schedule on it, etc.
What is the verb in you work late?
The verb in "you work late" is "work."
Will American cd's work in Australia?
Yes it can work Yes it can work Yes it can work Yes it can work
What is the difference between work input and work output?
Work Output is the work done BY a machine. Work Input is the work done ON a machine.
What is the differences between work input and work output?
Work Output is the work done BY a machine. Work Input is the work done ON a machine.
What did the executive work for?
they work for work law.
What did people do on weekends 1800?
Work work work and work some more.
How can you get 300 dollar As fast as can?
You can work for money.You can work for money.You can work for money.You can work for money.
What happened in the daily lives of medieval europeans?
For a peasant: Wake up, eat some moldy bread, work, work, work, work, work, work, work, work, eat some moldy bread, sleep, repeat.
