Lamp Bulb
Yes, if it fits the socket and the light fitting, or lamp fixture, with its cover or shade. You will not be able to dim the compact fluorescent as you did the incandescent (unless you have a really fancy dimmer).
A 20 watt incandesent bulb is dim. For a medium sized room you need 100 watts. A 20 watt halogen bulb is brighter but still quite dim. These are marketed as low-energy but they are not. For a medium sized room you need 80 watts. A 20 watt fluorescent bulb can light a medium sized room quite brightly. This is a genuine low energy bulb.
Yes, also you could try a lower wattage lamp that will still fit into the same fluorescent fixture.
If you use a non-dimmable Compact Fluorescent Lamp (CFL) in a circuit controlled by a dimmer switch no damage will be done but the CFL will stay bright when the dimmer is turned down whilst any other normal incandescent lamps wired into the same circuit will go dim in the normal way.Dimmable Compact Fluorescent Lamps are now available, for example in the Megaman range of CFLs. For more information see the Related Link shown below.Incandescent dimming uses any incandescent lamps and an incandescent dimmer.To dim fluorescent lamps usually requires use of fluorescent dimmers AND fluorescent dimmable ballasts. If these two components do not match, dimming will not work.The fluorescent lamps themselves are the same whether you put them in a standard (nondimming) ballast or a dimmable ballast.If your dimmers are not dimming the CFLs they are either not fluorescent dimmers or, more likely, your ballast in the light fixture is not a dimmable ballast.
probably you have wired it wrong so look at the wiring diagram that is supplied with the dimmer switch and make sure your wiring matches................or..............................you have a energy saving bulb connected whih do not like to dim they will flicker
Yes, if it fits the socket and the light fitting, or lamp fixture, with its cover or shade. You will not be able to dim the compact fluorescent as you did the incandescent (unless you have a really fancy dimmer).
A 20 watt incandesent bulb is dim. For a medium sized room you need 100 watts. A 20 watt halogen bulb is brighter but still quite dim. These are marketed as low-energy but they are not. For a medium sized room you need 80 watts. A 20 watt fluorescent bulb can light a medium sized room quite brightly. This is a genuine low energy bulb.
You need to purchase a Fluorescent dimmer switch, no circuit can dim the brightness of the light safely.
1) bad bulb - try switching them 2) bad ground
Yes, also you could try a lower wattage lamp that will still fit into the same fluorescent fixture.
no it is where the gray or black part at
In a series circuit, if another bulb is added, it is going to dim.
Answer Actually dimmer switches extend the life of a light bulb, especially if you dim them often.
You change the bulb for the right headlight the exactly same way as you changed the left only opposite. If you are replacing one headlight, even if the other still works it is best to replace them in pairs, for lights can dim and if you have a bright bulb and a dim bulb you could be in danger of distracting other drivers and causing an accident.
i think the light was quiete dim.
The headlight of yourÊ2003 Sunfire is probably dimming because the bulb is dying. ÊYou will need to have this bulb replaced.
The lights on your vehicle may be going dim because the bulb is getting ready to blow out. Try changing your bold and see if that helps.