0
A short answer:
An electric fence is connected to the ground only when an animal or a human being touches it to complete a circuit from the fence to the ground.
A longer answer:
The wires of an electric fence are not connected directly to the ground because, if that was done, the fence would be shorted out and would not be able to do its job!
This is how an electric fence is actually hooked-up: the electric fence is connected to one side of a specially designed high voltage source and the return side of that source is connected to the ground.
Then, whenever the skin of any animal - or human - touches the wire whilst standing on the ground in bare feet, they get a high-voltage (10,000) DC electric pulse from the electric fence. The shocks are designed to be only enough to make them jump back from the fence, not to "electrocute" them so badly as to cause serious injury or death.
Verlie Corwin
Wiki User
∙ 14y agoA short answer:
An electric fence is connected to the ground only when an animal or a human being touches it to complete a circuit from the fence to the ground.
A longer answer:
The wires of an electric fence are not connected directly to the ground because, if that was done, the fence would be shorted out and would not be able to do its job!
This is how an electric fence is actually hooked-up: the electric fence is connected to one side of a specially designed high voltage source and the return side of that source is connected to the ground.
Then, whenever the skin of any animal - or human - touches the wire whilst standing on the ground in bare feet, they get a high-voltage (10,000) DC electric pulse from the electric fence. The shocks are designed to be only enough to make them jump back from the fence, not to "electrocute" them so badly as to cause serious injury or death.
Wiki User
∙ 13y agoRight you are, the animal makes the ground connection when it touches it.
Wiki User
∙ 13y agoThat would be true, the animal makes the ground when it touches it.
Add your answer:
Earn +20 pts
Why does a cow that touches an electric fence experience a mild shock?
When the cow comes into contact with the fence, it becomes an electric ground which sends an electric current into the cow, through the cow, and into the ground. The pain experienced from the shock is due to the current that flows through the cow.
How do you make your own electric fence energiser?
You can use a 12volt car coil.
What shall do if someone is having an electric shock?
Don't touch the person, Otherwise you might also be electrocuted. Make sure there's no water nearby otherwise there might be a more sever electric shock. Get a non-metal object and remove the wire(if there is one) Check breathing and/or heart rate. Call 999 or 911 Whichever is your security number (I.e: Police, ambulance, Fire engine etc...) Pick them up from the ground because the one reason for electric shocks are caused by people accidently touching an electric fence. This is the way it works: Basically nearby there should be an electric box nearby which stores the electricity, and just think of it like a circuit... The electricity box is the battery (stores the power) the electric fence is the wire (Gets the electricity around) and because you are on the ground that completes the circuit. So the electricity passes through you into the ground and back into the electricity box. Thanks. By Molly
What happens when you wee on an electric fence?
You jump back about 10 feet and shake your head and say what the hell was I thinking.
If somebody was just curious and touched a electric fence that wouldn't be suicide it?
no it would just be stupid unless you couldnt read
Electric fences are not connected to the ground in the circuit?
A short answer:An electric fence is connected to the ground only when an animal or a human being touches it to complete a circuit from the fence to the ground.A longer answer:The wires of an electric fence are not connected directly to the ground because, if that was done, the fence would be shorted out and would not be able to do its job!This is how an electric fence is actually hooked-up: the electric fence is connected to one side of a specially designed high voltage source and the return side of that source is connected to the ground.Then, whenever the skin of any animal - or human - touches the wire whilst standing on the ground in bare feet, they get a high-voltage (10,000) DC electric pulse from the electric fence. The shocks are designed to be only enough to make them jump back from the fence, not to "electrocute" them so badly as to cause serious injury or death.
How to sketch the circuit diagram of Solar electric fence for animals?
wire diagram and list of parts for Solar electric fence
Electric Fence Installation?
form_title=Install an Electric Fence form_header=Keep animals inside the the boundary lines of your property safely and easily with an electric fence. What are you going to use this fence for?=_ What type of animals are you trying to keep in the property?=_ Do you want the fence above or below ground?= () Above () Below
Why does a cow that touches an electric fence experience a mild shock?
When the cow comes into contact with the fence, it becomes an electric ground which sends an electric current into the cow, through the cow, and into the ground. The pain experienced from the shock is due to the current that flows through the cow.
How do you get under ground to flick the switch to turn off the electric fence in poptropica?
Dig. Just dont hit the fence!!! Lol
Can an electric fence for horses be one continuous line?
electric fences require the conductor wire to complete a circuit (more than 1 for backup)
How do you turn a regular fence into an electric fence?
The fence must be made of a conducting material, such as steel. The fence must be isolated from the ground, using insulators. It must not touch the ground or the posts suspending it, except through insulators made of non-conducting material, such as pottery, glass or plastic. A high voltage, low current, generator can then be connected to it. One pole into the ground, using a metal rod pushed into the ground, and the other onto the fence. Most generators are driven by a battery, through an oscillator and then a transformer, which increases the voltage. It is better to use a generator properly manufactured, for the purpose of providing a small shock, without risk of death or fire.
How to Install an Electric Fence Safely?
Installing an electric fence is a dangerous job that has to deal with high voltages that can shock a person. Using caution while installing an electric fence by oneself, should be used, and directions should be read thoroughly. There are grounding instructions that should be met before even thinking about installing an electric fence, and one amp or 250 volt fuses should only be used when installing the power fence controller. A DC fencer should never be connected to an AC power supply. When a person grounds themselves before installing the electric fence controller, they should create a path of low resistance for an electrical current. The reason for this is if the electric fence controller has a malfunction, being grounded will reduce an electrical shock due to the malfunction. The operator controllers are AC operated controllers with a two blade attachment plug that should only be connected to a 120 volt circuit. The AC controller will need to be plugged into an outlet that has been inspected and found to be an appropriate outlet up to the proper codes.First Step for installing an electric fence:The fence controller should be installed undercover to protect the electrical connections from any type of wetness. The lead out wire from the fence controller will carry the voltage from the hot part of the fence terminal into the fence. The jumper wire will carry a voltage from the electrical fence from one fence into the other, such as multiple wire fence, buried wire, gates, and corners. An insulated cable that is meant for an electric fence should only be used. This consists of a ten to fourteen inch gauge wire insulated to twenty thousand volts. Common electric wire should never be used since it is only rated for six hundred volts.Second Step:A six foot galvanized copper ground rod should be installed within twenty feet of the controller. A ground rod clamp should be used to attach the insulated ground wire to the ground rod. The clamp must be firmly settled into the rod and ground wire. The ground wire should be a ten to fourteen foot ground wire insulated from 600 to 20,000 volts. Three ground rods should be installed six feet into the ground and spaced ten feet apart. The ground rods should be installed where there is always moisture, for best results.Third Step:Ground rods should not be installed fifty feet from a buried telephone line, water line, or a utility ground rod because these could pick up a stray voltage. If a person hears the pulses of their electric fence in their phone, radios, or televisions, then they have installed their ground rods too close to utility line. Livestock can be shocked if a ground rod is installed to close to a water line where they drink water.Fourth Step:Use correct wood posts that are designed for electric fences that can be used without insulators. Good connections should be made with wire clamps, correct splices, and wire connectors. High quality type of insulators should also be used, such as high quality insulator wrap, gate handles, and ultra violet inhibitors. Wrapping wires loosely will cause corrosion where the splices meet and will reduce the power from the fence. Wood posts are always better to use, but if a person is using a metal fence post, they should ensure that the fence wires are not touching the post.
What is the cost for an electric dog fence?
I am needing a fence put up for my dogs. What is the average cost for an electric dog fence?
What is Electric Fence?
a Fence that holds electricity currents
How do you properly ground an electric fence?
You need to have a grounding rod made of galvanized steel that is driven straight into the ground until only half an inch of bar is remaining above ground. The ground rod should be at least 6 feet in length. Drier land areas normally require a longer grounding rod, or more of them, spaced 10 feet apart. The ground rods themselves should be placed in [an] area[s] that are naturally permanently moist to have any effect. Then you have to run a grounding cable that is attached to the ground rod along the bottom or top of the fence (can be the top wire or bottom wire) all the way to the fence charger. This cable needs to be attached to the ground rod by ground rod clamps That grounding cable should be attached to that fence charger in order for the fence to be properly grounded. Check out the following links on tips and instructions on how to properly ground an electric fence.
How do you create an electric fence?
You need an electric fence controller, first off. The purpose of an electric fence is to scare whatever touches it into staying away. If you try to make one by wiring it to mains power, you will just kill whatever touches it. You can get a controller at Tractor Supply Co. After procuring a controller, running an electric fence is a simple matter of stringing wire on insulated posts. You connect the controller to your fence and ground, and there you have it. Talk to the salesperson at the Tractor Supply store. They will have controllers, wire, insulators, posts that can be easily installed, gate handles, and whatever else you need.
