parallel and series
Closed.
To whom it may concern, Did you mean to ask what is static electricity?? If so the term static, which means stays the same, means the electricity in a circuit is static; it does not change direction and electrons only have 1 path to travel. An example of a static circuit would be a DC ( Direct Current) circuit, whereas an AC circuit; alternating current, alternates between 120v to 0v, then 0 to negative 120, back to 0v, then to positive 120v, however, this happens at so fast you would never catch a reading on a multi meter.
All electricity or electronic circuits will not allow the current to flow if they have switching devices in series in their circuits.
In a lighting circuit an open circuit will turn off the light.
If the gap is small then you may get 'arcing'. This is where the electricity will jump from one point to another (cable end to cable end). This could cause a fire. If the gap is too large for the electricity to jump then in effect there will be no-circuit.
Electricity, this may be electrons in a direct current. In an alternating current the electrons stay where they are and it is only the energy that moves between electrons.
"closed"
Electricity travels in a closed circuit when it does work.
Yes an electricity travels in an electromagnetic circuit. No it Doesn't
Electricity travels in a closed circuit when it does work.
Current Electricity
a circuit.
The electricity follows the entire length of the wire. if any part of the circuit is broken, all the electricity stops moving in the circuit.
The flow of the electricity is being pushed through the circuit because of the electrons.
branches
It goes negative to positive.
Yes, an open switch breaks the circuit and prevents electricity flowing through. A closed switch on the other hand completes the circuit and in turn helps electricity travel through the circuit.
In electronics, a circuit is a complete circular path that electricity flows through. A simple circuit consists of a current source, conductors and a load. The term circuit can be used in a general sense to refer to any fixed path that electricity, data or a signal can travel through.