0
The basic idea is that you can remove most of the water in the clothes by spinning the drum that holds them really fast for quite a while. (Newer hi-tech dryers do a much better job of this than old fashioned ones, by the way.)
As a couple of people already pointed out, a centripetal force is one pointing *toward* the axis of the rotating drum. A centripetal force from the inner drum's surface acts on the clothing to keep it moving in a circle as the drum spins.
But the water in the fabric is only held to the fabric by a weak attraction. This force isn't strong enough to hold the water in the same circular path as the clothes when the drum spins fast, and the water flies out through the holes in the drum and gets pumped out to the drain.
The spin cycle, the clothes will not fit through the holes in the washing machine's drum but the water will. This means that while the washing machine is able to exert a centripetal force on the clothes, the water absorbed by the clothes does not have the same amount of force exerted on it so it moves away from the axis of rotation (and out of the clothes). The force of the spinning action slings the water from the clothing into the outer basket and the pump removes the water from the tub.
The washing has centripetal force acting on it because it is constantly changing direction, which equates to a change in velocity as velocity is a vector, therefore it's accelerating towards the center. (F=ma and F=(mv^2)/r are relevant formula's for force.)
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Why does water escapes from the wet clothingin a spinningclothes dryer?
in these dryers there are tiny holes in the metal spinner. when the dryer spins the clothes hits the walls of the spinner but of course won't be able to escape, however the water which acquires a very high speed and inertia would be pleased to escape the spinning hell through these tiny holes.
Describe what a machine is able to do?
a machine is able to work in gears and metal to produce something.
What is the goal of physics?
To be able to mathematically explain all physical phenomena.
Is static electricity on clothes in a dryer caused by friction or induction?
Static electricity causes the clothes to stick together because in the electricity, the negative and positive charges created by the heat and clothing materials are attracted to each other. This makes the clothes stick together when you pull them out of the dryer DIS IS FISH GUTS
How is the spin dryer of a washing machine able to dry clothes?
Take a small towel or even a facecloth outside and wet it with a hose or at a hose bib. Wet it really well. Then take the wet material and swing it around in "windmill" fashion like underhand softball pitchers move their arm to accelerate a ball. Water will be flying off the material as you swing it. Centrifugal force is at work moving everything "out" from the center of rotation. Even the wet material will be stretched "out" from where you're holding it. This is centrifugal force., and it is the protracted action of applied centrifugal force that "forces" water "out" from the center of the tub in the washer, and out through the holes in that tub so it can be collected and pumped out of the machine during the spin cycle. Some moisture stays in the material, but most of it is "thrown" off.
Is there an adapter for a gas dryer?
You may be able to buy bottled gas that will run your dryer. You may have to use the sun and the wind to dry your clothes.
Which washing machine can hold the most clothes?
Any industrial washing machine, such as from GE or Maytag, will easily be able to hold clothes for a family of four.
Can ultra suede be machine washed?
Yes, Ultrasuede can be machine washed. It was designed to be able to stand up to machine washing with other clothes.
How to Repair a Dryer?
A dryer is a machine that allows clothes to dry easily either by using heat or moisture. A dryer is most useful during rainy seasons when you hardly see the sun. Clothes that are not expose under the sun will take longer time to dry and will also have a funny smell. Since dryer is a powerful machine, you need to take reasonable care of it. In times when the dryer is not working properly, you also need to know some basic trouble shooting steps. Having adequate knowledge can save time and money. Remember that safety should be your outmost priority. Before inspecting the machine and performing any repair, make sure that the device is unplug from the power source. Your hands should also be dry and wear a foot wear to avoid electric shock. It is best to use eye protection especially if you are using any substance when repairing the machine. See to it that your clothes and hair does not touch any moving parts of the machine. There may be different problems why the dryer is not working. If there is no power and dryer are not working at all, first thing to check is if the machine is receiving an electric supply. It is also possible that the thermal fuse already burned out. You need to replace it if this is the case. If the dryer is working but is taking too long to dry clothes, you need to check the dryer vent host for any clog. If the dryer is not cleaned regularly, lint will accumulate. Check if the vent is kinked because this might also cause a problem. This affects the performance of the dryer and may also cause fires in extreme cases. Try to check the thermostat, as well. If it is already broken, replace it immediately. If the dryer is not producing heat, then the gas valve coils may be defective. This will prevent opening of the valve and gas from igniting. Replacement of the valve will solve the issue. If the dryer is making a lot of noise, then the motor might be defective. These are just the basic things that you need to check. If you are not an expert in repairing dryers, it will be helpful to look for a technician who may be able to assist you.
Where can one find parts for a Whirlpool dryer?
The best place to find parts for a Whirlpool dryer would be the Phillips website if the model is relatively new. If it is an older machine then Espares would be a good source as they are able to find parts for most electricals.
What exact is stack able washer dryer?
Instead of the washer and dryer being side by side, the dryer is stacked on top of the washer.
Where can one find Maytag dryer parts?
If a Maytag dryer breaks down, it may be able to be fixed with a new part for a fraction of what it would cost to buy an entirely new machine. Places that offer Maytag parts include Sears, Amazon, eBay, and Repair Clinic.
What kind of simple machines is a washing machine?
a washing machine means that wash the clothes . simple machine that makes work easyIf you are using a combo washer, there is the dryer. You will be amazed of the numerous features of washers today. You might be able to find a sensor in it as well. These sensors work in detecting sud or moisture content in your laundry. This helps a lot in conserving energy and water.Wheels and belts.wheel & axle, lever
How do you fix a clothes dryer?
GET AN ELECTRICIAN. or take it back to where you got it. they'll be able to fix it. You could fix it yerself depending on the problem and the tools and help you have, but i'd go with the first er second option. :]
How does the sewing machine affect daily lives?
without this complex machines, sweat shops in povety ridden countries will not be able to produce clothes for me to wear. So it saves them from being slaughtered and fed to vietnamese cannibals
Maytag Dryer Repair: Three Tips on Repairing Your Washing Machine?
You are bound to experience some problems with your Maytag at some point in the future. Fortunately, there are a few steps that can help you with Maytag dryer repair. Let's take a look at them. Cord Check the cord for any shortages. Switch The switch may need to be replaced if the machine fails to work. You can replace the switch with ease with the correct tools. Fuses The fuses should also be checked if you are not able to get your dryer to work properly. Maytag dryer repair is not as difficult as you may believe. The three tips listed above can help you get off to a great start.
Why does water escapes from the wet clothingin a spinningclothes dryer?
in these dryers there are tiny holes in the metal spinner. when the dryer spins the clothes hits the walls of the spinner but of course won't be able to escape, however the water which acquires a very high speed and inertia would be pleased to escape the spinning hell through these tiny holes.
