Not much it seems. http://thebeautybrains.com/2006/08/28/are-womens-razors-different-than-mens/
Remington MicroFlex R-650s
Unless you have money to throw around at Christmas and you want to leave some dough left to buy some cologne to go with the clean shave, I recommend the Remington triple head shavers because they do a good job if you skip a couple of days chasing that 5-oclock shadow look. I've used the trip head rotary for years and have tried many others that were given as gifts,...nothing can beat the "ol faithful" Remington rotary! The R-650 is an upgrade from the fantastic R-600,...you won't do better.
That said, you need to first find the problem that is causing the blades to lose their sharpness. Most likely, the blades have not been oiled, have sat and corroded, or they have been used to "clip" something besides hair. Clippers are usually designed so that they can be taken apart for small repairs and maintenance - there should be one or two screws holding the stationary blade in place. Remove these screws and disassemble the cutting head, remembering the order and placing of each part.
First, clean all the loose parts by filling a small dish with 90% isopropyl alcohol (the more expensive one in the alcohol/first aid section) and soaking the parts in that. Rub them briskly with a soft cloth to remove any dirt, corrosion, or old grease. Check between the blade teeth that they are not clogged with any debris. If you feel the need to sharpen the blades at this point, do so by placing the blade flat on a fine-grade sharpening stone (with a drop of oil) and gently but briskly, keeping the blade flat, grind it in one direction. Do this about 5-10 sweeps. Then, repeat in the other direction (do not go back and forth - always sharpen one edge at a time!)
After this, take the two pieces of blade, inspect them to make sure they are "cleanly" sharpened, and wipe them again with the alcohol. After making sure that all the innards are completely clean, re-assemble the cutting head. Make sure that the blades are straight and centered - this is very important! - and at the correct displacement at the end (usually only a matter of a centimeter or so - two much space and there isn't enough surface-against-surface to cut all the hair, which might have been the problem in the first place.) After getting the blades properly aligned and staight, tighten the head screws as tight as you can.
Place about three drops of a light=grade oilon the blades - 3-in-one oil works, and hydraulic jack oil is great too. Plug them in, let them run together for a while to get lubricated and to de-burr themselves, and test them on some hair. Hopefully they will work now!
Ok, if they don't, then you most likely need to do one of three options, depending on how much you paid for the clippers. If they are a good brand (like Oster) and were pricey, you should be able to go to any beauty supply store and either buy or order a new blade set. Keep in mind that blades can be pricey - but if it's a reliable clipper brand, a new blade is a good investment.
Another option is to have the blades professionally sharpened. Check around for a blade-sharpening service - sometiems they are non-local and you have to ship the blades to them. But tif it's an expensive set of clippers, sharpening may be a good, economical option.
If the clippers are NOT a good brand, or were cheap when bought, or seem to be low quality, you are probably best to just buy a new set. Most major department stores carry a variety of clippers - spend your money wisely on a dependable, simple set of clippers. Do not go for the lesser brand's expensive clippers with lots of "functions" unless you are positive about the quality. In the long run, a very simple set of clippers is probably better- cutting, and longer lasting, than a comparable-priced set with lots of do-dads. Also remember to buy clipper oil!
And with the new clippers, follow the manjfacturers instructions, keep them clean and oiled, and you should have a good set of clippers to last a long time.
With Remington razors falling heavily into the category of health and beauty then the first place to look would be any of the major pharmacy stores or the healthy and beauty section of any high street store.
Norelco razors are made by Philips. These razors are sold at Walmart, Target, Kmart, Sears, Sam's Club, Costco, Amazon, E-bay, Best Buy, Bed Bath and Beyond, Kohl's, and also are sold online on there own website and other websites.
Because businesses are inconsiderate douchebags thatwant the poor societies money.
The Art of Shaving is a company that is most known for producing straight razors and shaving accessories. Their products can be purchase online or at one of their many retail locations.
There are over 2 billion razors sold per person in the US each year. Over 150 million men contribute to those sales.
How often a woman shaves her legs depends on how often she shaves and the types of razors she uses. Cheaper razors should be disposed after one or two uses. Name brand razors can be disposed after 4 to 6 shaves in general.
The safety razor was initially developed by William S Henson as an improvement on the cut-throat which was being used at the time. The disposable blade was invented by Gillette. Initially he had experimented with glass blades, that failed, and moved on to metal.
There really isn't much difference. Girls shave their legs, thighs, and under their arms. Guys shave their facial hair. Both men and women shave their pubic region by choice but it is typically not standard to do so. Females have a shaved pubic region more so than men do.
If the price of electric razors is suddenly higher, then fewer people can afford to buy or choose to buy the electric razors. Therefore, demand might increase for the more affordable nonelectric razors.
(gradpoint) because people might decide to shift to nonelectric razors to save money
OK it was almost 5 years ago (and still the razor I was given still works. The Gillette Fusion Power Brrrrrrrr razor still works. When I ask my mates how long the blade lasted they all have different time scales. I still win as I'm still using the original blade on my Gillette Fusion since xmas 2007.
I keep telling peeps but they don't believe me. I know you guys can help as it would not be financially beneficial.
I have a smooth shave with a blade I got in 2007. Why should anyone listen to your adverts sayini you need to spend £7.99 every month to get the best shave?
So why don't you advertise that we should change the bade before the 5yr period is up?
Norelco electric razors can be bought through several retailers. Online retailers include Amazon and eBay. Retailers that have both online and in store purchase options include Walmart and Target.
they can be put in your checked luggage, but, i wouldn't put them in your carry-on bag. also, would seal in ziplock bag (with pressure change in airplane, sometimes can could leak/ explode). check airline's policies-- recently i was allowed to carry applesauce on the plane, but not yogurt. they have the weirdest rules in place right now.
I don't think there is. I inspected and took apart each type of blade and I could find no difference except for the color. So I've been buying the manual fusion blades and using them in my fusion power.
You don't....
women shouldn't shave their faces because the hairs on your face will grow thicker.
"Marketshare" means how many percent of a market is held by a particular product. For instance, if 100 pickups were sold in Elizabethtown, NC, last week and 22 of them were Toyota Tundras, Toyota Tundras had a 22 percent marketshare last week. Cool? Your question really isn't answerable, sorry. Do you mean "what's the marketshare of shaving cream in the shaving cream market," "what's the marketshare of shaving cream in the toiletries department" or "what's the marketshare of shaving cream in the whole drugstore"? Or better, what's the marketshare of Gillette Foamy shaving cream in the shaving cream market?