Any formula relating those two quantities must depend on the technique used to generate
light by means of electric current.
We know that there can't be one universal formula because, for example, we know that
a compact fluorescent lamp uses less current to produce more luminous intensity than an
incandescent lamp.
The candela measures luminous intensity, whereas the lumen measures luminous flux. In simple terms, you can think of luminous intensity as being similar to 'brightness', while luminous flux is similar to the rate at which light leaves its source.
I don't believe that there is such a thing as an 'ampere per lumen'. An ampere is the SI unit of current, whereas the lumen is the SI photometric unit for luminous flux. There is no direct relationship between the two.
The screw is to change between a luminous flame(orange) and non-luminous flame(blue). You should always screw the lock so that it covers the hole first.
A formula unit is an empirical formula.
There is no 'formula' which defines the ampere. The ampere is defined in terms of the resulting force between two parallel, current-carrying, conductors, due to the magnetic fields surrounding those conductors.
The candela measures luminous intensity, whereas the lumen measures luminous flux. In simple terms, you can think of luminous intensity as being similar to 'brightness', while luminous flux is similar to the rate at which light leaves its source.
Ohm's law states that the current through a conductor between two points is directly proportional to the potential difference across the two points, and inversely proportional to the resistance between them
Electric current, magnetic field intensity, length of the conductor, angle between the electric current and magnetic field
Illuminance is another word for 'luminous-flux density', which describes the intensity of the luminous flux hitting a surface. Its SI unit of measurement is the lux, which is a special name given to a lumen per square metre. Luminance is a measure of the intensity of the light reflected by a surface. Its SI unit of measurement is the candela per square metre.
i don't know ask yourself
the current in mosfet is controlled by electric field where as in poto diode is controlled by intensity of light
Luminous means the objects which emit light and i think there is no word iluminous in dictionary.instead that non luminous means which do not emt light by themselves
-A non-luminous flame is when the air hole of the Bunsen burner is closed but a luminous flame is produced when the air hole is opened.-A luminous flame has an outer of orange colour and an inner of blue. A non-luminous flame has an outer of blue and an inner of orange.-A luminous flame produces soot while a non-luminous does not produce soot.-A luminous flame is weak and unsteady. A non-luminous flame is strong and steady.-A non-luminous flame is very hot while a luminous flame is not too hot.
the difference between total current assets and total liability is the working capital. It goes with a formula 'current asset -current liability =working capital '
the Decibel it measures the loudness and intensity
One is luminous and the other is illuminated. If you know what these words mean, that should be enough.
An illuminated object reflects light that came from somewhere else. A luminous object emitts its own light.