The least count of the vernier can be measured by using the formula stated below. Least count (L.C) = 1 M.S.D - 1 V.S.D Example; vernier scale is constructed by taking 49 main scale divisions dividing them into 50 divisions ie. 49mm divided into 50 parts therfore 1 vsd=49/50 mm=0.98mm 1 MSD=1mm substituting in formula L.C = 1 M.S.D - 1 V.S.D L.C=1-0.98=0.02mm
Depends upon whether you are using a BRITISH measure or a METRIC measure type of Vernier Caliper. You do not ever 'calculate' with callipers. You 'read' the marks on them. Vernier callipers have scales which are in tenths and hundredths and thousandths if they are METRIC ; or scales marked in tenths and hundredths if they are IMPERIAL (British)
Least count=1 MSD - 1 VSD
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
there is a big different between the vernier caliper and micro meter caliper,the vernier caliper they can use the outside and inside measurement while the micro meter caliper it's just only use outside measurement..
first find out least count of main circular scale in degrees,then divide least count of main scale by total divisions on cylindrical scale(this cylindrical scale works as vernier scale for fist one,its least count will be in minutes) then further divide least count of cylindrical scale by total divisions of small vernier scale which touches it,(this small scale works as vernier scale for cylindrical scale and its least count will be in seconds).
1/16 of an inch. any smaller and the lines start to blur and make the ruler unusable.Answer:A machinists ruler may be divided into units of 1/64 th of an inch.
1)Main Scale is fixed(It does not move) Vernier scale slides along main scale.2)Least count of Mainscale is 0.1cmLeast count of vernier scale is 0.01cm
0.01mm
The least value which can be measured from any measuring instrument or device is called its least count. Generally the least count of a vernier caliper is 0.02mm.You can get a least count of 0.01mm in Digital vernier caliper.
The least count of vernier caliper is 0.01mm while the least count of screw gauge is 0.001 mm. ... Difference between screw gauge and vernier caliper in tabular form. Micrometer Screw Gauge Vernier caliper It has a circular scale. It has a vernier scale. It rotates to measure the objects. It slides to measure the length.
Least Count [L.C]:-Least count is minimuim acuurate value meauserd by instrument.Least Count of Vernier Callipers:-The minimum value measured is 0.1mm but nowa days [l.c] is of 0.5mm.'
*Micrometer have a rotary handle and whereas vernier have a slider. *Micrometer is for measuring diameters while vernier is for measuring inside & outside diameter as well as depth. *Least Count of Vernier Caliper is 0.02mm *Least Count of Micrometer is 0.01mm
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
In case for micrometer, principle of pitch is used. Least count could be even micro meter But in vernier caliper, difference of main scale division and vernier scale division is the principle Least count could be 0.02 mm
Least count of vernier caliper= 1 MSD - 1 VSD. Main scale usually would have 1 mm as the minimum division. Such 9 divisions, ie 9 mm would be divided into ten equal parts in the vernier. So VSD = 0.9 mm Hence the least count = 1 - 0.9 = 0.1 mm If the same is to be given in centimetre, then it will be 0.01 cm.
i think 0.01
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
No unit for vernier scale coincidence. But as we multiply it by least count which has unit then we get vernier scale reading with the same unit. Of course main scale reading and vernier scale reading would have the same unit
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE