Look in PAGE 500 of the Owner's Manual
check the fuse that's if the bulb is not burnt out.
The fuse box is located under the hood to the right of the engine. It's in a black box.
The rear windshield wiper fuse for a 2005 Toyota Sienna is located in the fuse box inside the vehicle. Specifically, you can find the fuse box on the driver's side, under the dashboard. The relevant fuse is typically labeled for the rear wiper; consult the owner's manual for the exact fuse number and specifications. Always ensure the vehicle is off before checking or replacing fuses.
The fuse box on a 2004 Toyota Sienna is located between the hood release and the steering column. It can readily be accessed by the driver from the floor board.
In our 2002 Toyota Sienna, it's behind the felt lined drawer on the bottom left of the steering column.
Driver side under dase is a fuse box. It should be the second row, 3rd fuse from the top (toward accelerator) 15 amo.
I believe the fuse is located under the driver's side dash. It is rectangular black cover. The ower's manual has a picture in it showing the location of all fuse panels.
WHERE IS THE FUSE LOCATION FOR THE DASHBOARD ON 2004 TOYOTA SeQUOIA
My answer is for a 2004 Sienna so hopefully for you it is the same for a 2005 Sienna. I noticed I suddenly had no power to anything in the van. I tested the battery and it had 12 volts.All the fuses were working.removed the 30 amp main fuse and volt tested the fuse contacts in the fuse box and had 2 volts.Checked wire at the alternator and it only had 2 volts. The fusable link , a wire that runs from the positive terminal on the battery to the bottom of the main fuse box had corroded.
The fuses for 2000 Toyota Sienna is located in the engine compartment. The fuses are labeled as slot 12 and 13 and are rated at 15 amps.
To remove the fuse for the horn in a 2000 Toyota Sienna, first, locate the fuse box, which is typically found under the dashboard on the driver's side. Use the fuse puller tool usually included in the fuse box or a pair of needle-nose pliers to gently pull out the fuse labeled for the horn. Check the owner's manual for the exact fuse number and location if needed. Once removed, you can replace it with a new fuse if necessary or leave it out to disable the horn.
doesnt seem to be one!