The protocol parameters that may be negotiated during the setup of a connection could be maximum packet size, maximum transmission/reception speed, and quality of service standards.
These protocols require that a logical connection be established between two devices before transferring data. This is generally accomplished by following a specific set of rules that specify how a connection should be initiated, negotiated, managed and eventually terminated. Usually one device begins by sending a request to open a connection, and the other responds ' like telephone call'.
DHCP is a connectionless protocols. In general, any protocol that is based on TCP port alone is a connection-oriented protocol while any protocol that is based on UDP port alone is a connectionless protocol. And a protocols that can work on both TCP and UDP port can be either a connection-oriented or a connectionless protocol depending upon the which protocol is used (TCP or UDP). For checking other protocols if they are connection-oriented or connectionless check http://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers
protocol is a connection establishment between the source computer to destination computer ex: tcp / ip protocol
The logon is managed by a protocol called PPPoE (Point-to-Point-Protocol over Ethernet), which is why the connection is sometimes called a PPPoE connection. (Andrews. A+ Guide to Managing & Maintaining Your PC, 7th Edition. Delmar, Cengage Learning/CourseSmart, 12/02/2009. 927). <vbk:PBK9781435497788#page(927)>
HTTPSHyper text transfer protocol secure
TCP is the protocol of network layer, It is connection oriented protocol. UDP is the protocol of network layer, It is connection less protocol.
LCP sets up the PPP connection and its parameters. NCP handles higher layer protocol configurations.
Different from a connectionless protocol, a connection-oriented protocol guaranties the delivery of the information. An example of connection-oriented protocol is (TCP) and a connectionless protocol is (UDP). TCP is a connection-oriented protocol, it makes a connection and checks whether the data is received, and resends if it is not. UDP is a connectionless protocol, it does not guarantee delivery by first connecting and checking whether data is received.
A ssl connection is a transport services that provides a acceptable type of service and A type is created by the Protocol, and it defines a set of cryptographic security parameters which can be shared among multiple connections.
The Bradley Protocol
These protocols require that a logical connection be established between two devices before transferring data. This is generally accomplished by following a specific set of rules that specify how a connection should be initiated, negotiated, managed and eventually terminated. Usually one device begins by sending a request to open a connection, and the other responds ' like telephone call'.
protocol means connection from 1computer to another computer
Internet Key Exchange
Connection oriented is more reliable because there is an acknowledgment received from data receiver (destination) that the data is receiving and transfer is successful which is not received from connection less protocol.
Different from a connectionless protocol, a connection-oriented protocol guaranties the delivery of the information. An example of connection-oriented protocol is (TCP) and a connectionless protocol is (UDP). page/926 A+
DHCP is a connectionless protocols. In general, any protocol that is based on TCP port alone is a connection-oriented protocol while any protocol that is based on UDP port alone is a connectionless protocol. And a protocols that can work on both TCP and UDP port can be either a connection-oriented or a connectionless protocol depending upon the which protocol is used (TCP or UDP). For checking other protocols if they are connection-oriented or connectionless check http://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers
SONET