First, spin the dial clockwise a few times to reset the lock. Then continue turning clockwise until you reach the first number of the combination. Then spin the dial counter-clockwise one full revolution so you are back at the first number. Then continue turning counter-clockwise until you reach the second number. Then turn the dial clockwise until you get to the third number (do not spin the extra revolution this time). At this point, you should be able to pull the lock open.
To reset a Lewis N. Clark 3-dial TSA002 combo lock, do the following: 1) Position the lock so if you're looking straight at it, the lock is set on it's large flat side, with the combo numbers on the right side and the n-shaped clasp open on the left. 2) Pull the clasp straight up and rotate it counter clockwise 180 degrees and press it down. 3) While holding the clasp down at the 180 degree location, dial in your new combo. 4) After the new combo is set, release the downward pressure on the clasp, continue rotating it counter clockwise to the lock position and you're done.
If you know your combination open the top lock turn the change pin on the right side 90 degrees clockwise (looks like a flat head screw; use a coin or paperclip) set number dials to what you want turn back tha change pin 90 degrees counterclockwise close lock new combo is set If not there are tools you can you to crack your shurlok for some brands like Olympus But i'd recomend sending in the lock to allow them to reset it.
Start praying that you remember the combo.
P3tnp2cdxp (all capitals)
True
I had the same problem. Turn the lock to 0000 then stab the button with a pen or pencil and hold it down as you turn the lock to the new combo. Ta da your lock is now set to the new combo. Good luck :)
you dont
Problems resetting and lock 3-dial combo lock
you cant you need to know the combo and have the lock open to access the combination change device if there was a way to reset a combo on a locked lock what kind of security would that be?
a simple pad lock or a combination lock. and if you forget the combo or lose the key you can cut off a small piece of the fabric
The Jack Georges Platinum is a great compact briefcase which has a combination lock and metal frame.
Try 0005
Lost code for bicycle lock how do i reset 4 digit bicycle combo locks og
My brinks locked in the open position. What do I need to do to get it fixed
To reset a Lewis N. Clark 3-dial TSA002 combo lock, do the following: 1) Pull the shackle up and rotate it 180 degrees. 2) Press and hold down the shackle 3) While holding the shackle down, dial in the new combo 4) Release the downward pressure on the shackle and rotate it to the lock position and you're done
show a travelpro three number lock.I've lost the combo and can't get it open.
To reset a Lewis N. Clark 3-dial TSA002 combo lock, do the following: 1) Position the lock so if you're looking straight at it, the lock is set on it's large flat side, with the combo numbers on the right side and the n-shaped clasp open on the left. 2) Pull the clasp straight up and rotate it counter clockwise 180 degrees and press it down. 3) While holding the clasp down at the 180 degree location, dial in your new combo. 4) After the new combo is set, release the downward pressure on the clasp, continue rotating it counter clockwise to the lock position and you're done.