PVC or polyvinylchloride is a material used to make raincoats, according to my science teacher. i was learning it today and she said something to do with polymers n bonding you do polymerisation and it requires a high pressure and a catalyst - i used broken pottery.
PVC= Polyvinylchloride CBC= Canadian Boardcasting Incoperation
how follicular study can done
give reasons why blendig is done
Work is said to be done where certain displacement is involved. Ex. Of work not done is Coolie carrying Load on his head..
Yes. The work is being done by whoever is pushing rather then the engine, but work is being done. Any time a force is applied through a distance, work is being done.
You do not adjust PCV valves. You just replace them. Now if you are referring to the intake and exhaust valves, then you need to have this done by a professional. Severe engine damage can occur if this is not done correctly. Only a job for an expert.
AnswerIt doesn't have a PCV valve.Actually it does. The PCV valve for a 1993 Nissan Altima is located behind the engine below the intake. Buy a Haynes manual, the PCV is VERY tough to get too but it can be done. You can only get two bolts from the top but have to go from underneath the car to detach the hose.
Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.
Pull upward on the hose that the PCV valve is in. The PCV valve will pull out of the hose. The PCV valve is located in the valve cover.
At 100,000 miles change the spark plugs. Check the air filter and PCV valve. You're done.
Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.
pcv valves are always located on valve covers (but not all vehicles have pcv valves)
The PCV valve has a check ball in it, That's what you are hearing. REPLACE PCV VALVE
There is no PCV plumbing there is how ever PVC piping and fittings
PCV is positive crankcase ventilation
Diesels generally do not have pcv.
I have a 1998 Ford Escort ZX2 and the PCV valve was located to the right of the exhaust heat shield in front of the engine block. All I had to do was pull the rubber elbow out that was connected to the PCV valve and then pull the valve out. It was arguably the easiest maintenance work I've done on a car. I didn't have to take apart the heat shield or any other component.