Disconnect positive battery cable and step on the brake the after 10 mins reconnect the battery cable andthe computer will be reset
Engine light can be done with a code reader, for anti theft you need an auto locksmith
I use a scan tool after repairing the cause of the code.
You will need a code reader. Your local auto parts store can sell you a simple one for $60 to $80. It will come with directions and a book of code definitions.
use a code reader to check the problem and it will reset the light, but if you do not fix the problem the light will continue to come back on.
You use a scan tool after repairing the failure that caused the code.
In the trunk, under the carpet, on the left side.
Unplug the baterry, press brake for 20sec, done :)
After fixing the cause of the code, you reset the code with a scan tool.
Acura CSX2006-2010Turn the ignition to (II) - do not start the engine.Press the SEL/RESET button on the steering wheel until you see the engine oil life display.Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.Select RESET by pressing the INFO (â–²/â–¼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.Turn the ignition off and then start the engine to verify the indicator has been reset.
After reading the code, and repairing the codes, you reset code with a scan tool.
After repairing the cause of the code, you reset with a scantool.
After repairing the cause of the code, you reset with a scan tool.