Sand and water can be separated by Filtration.
Soluble in water, sand is not.
<p>You can separate the sand by filtration, but still the salt (mainly sodium chloride) is dissolved in the water. Then, you can separate the salt from water by distillation. The liquid you collect after water vapor is chilled is distilled water. You can use other methods to separate sand as sedimentation (usually slower than filtration) and salt as reverse osmosis.<p>
Pour water into the mixture, let the salt dissolve.Then, put the wet-salty water-sand mixture through a sifter/filter.Take out the sand from the filter and dry it. COMPONENT 1 - SANDBoil the salt water solution and evaporate the water. The residue will be salt. COMPONENT 2 SALTDissolve the mixture in water first, before filtering the resultant solution. The residue is the sand, while the filtrate is the salt solution.
Firstly, water is to be added to make sugar water solution. The the total mixture of sand and sugar-water solution is passed through filter paper. The sand separates out and sugar water solution is collected in a vessel. Then by evaporating sugar is collected.
Salt is soluble in water where as sand is not. Using a fine paper filter in a funnel the salt can be removed from the sand by rinsing the mixture with water and then the salt can be retreived by evaporating the water. Hope I'm not doing your homework for you
Water and Boiling Water
Add water, separate the water from the sand. Let the water evaporate.
You can separate sand from water by evaporation or by filtration.
to separate the mixture of sand and sugar:- first: you can mix water in it and after mixing you can separate the water and sand. and after that you boil the water until whole water is evaporated and you get sugar and sand separated. second: if difference b/w size of sugar and sand particle you can use met to separate them.
Water can be separated from sand by decantation or simple filtration.
get a strainer to get the sand out silly :)
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
You just need to use filter paper. use the filter paper than just pour the water and sand on the filter paper. the sand will go to the filter paper while the water will go straight to the beaker or anything below it. That is how you separate it. To separate sand and water you could pour the mixture through a filter. The water would pass through the filter but the sand would remain on top of the filter. If you didn't need to save the water you could evaporate the water and leave the dry sand behind. Or allow the sand to settle and carefully pour off the water first. Then allow the remaining water to evaporate.
Place the mixture in water and separate the sand from the water if you want the salt. alow the water to evaporate, and you have salt and sand separated.
Sand and water can be separated using a cheese cloth or filter paper.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
water