That is because the 885kW capacity is its cooling capacity. This is the amount of heat it can take out at the evaporator. The 225kW is the power input to the compressor. This is used to define the Coefficient of Performance of the Chiller (COP), which is 885/225
ikwr-input kilowatt rating
condenser capacity(kw) = compressor cooling capacity (kw) + compressor input (kw) power condenser capacity(kw) = Pf + Pa
(1) Control Stick - Pull back and push forward will input control to the Elevator that will raise the nose and drop the nose of the a/c. Move stick to Left and Right will input roll commands to the ailerons on the wing-tips. (2) Control Wheel - Pull wheel out and puch in will input pitch control. Rotate wheel clockwise and counter-clockwise will input roll command to the ailerons.
TURBINES: generate electricity. use an input to obtain mechanical output. PUMPS: Basically create lift in water. Use mechanical input to create an out put
Efficiency=Useful energy output divided by the energy input. i.e. 100 J is the energy input and you get 5 J light energy from a lamp, the waste energy would be 5 J.
ikwr-input kilowatt rating
Chiller is broadcast on 199 in my area. You can go to Chillers website; on the right side of the page, click on Get Chiller. Just input your zip code and service provider (DISH Network) and select Go. It will tell you the channel number it broadcasts on DISH.
electrical and kinetic
Electrical energy
A microphone is a device with an electrical output. An acoustic wave is the input. Its only function is to 'capture' sounds and convert them into an electrical signal for processing by the computer.
UPS is Uninterruptable Power Supply. It is neither input not output. It supplies electrical power to a computer when the main electrical supply is interrupted. It does not handle data in any way.
condenser capacity(kw) = compressor cooling capacity (kw) + compressor input (kw) power condenser capacity(kw) = Pf + Pa
how does input device work
Flow rate times pressure divided by input will yield air compressor capacity. Input is another term for horsepower of the compressor. The pressure can be adjusted depending on how compact the result is to be.
Coupling field is link between electrical and mechanical energies in electromechanical energy conversions. If the output is mechanical (motor), coupling field reacts with input electrical energy in terms of Back EMF which opposes the input. Coupling field absorbs energy from electrical system, converts and delivers mechanical energy. If output is electrical (generator), coupling field reacts with input mechanical energy in terms of Magnetic Drag which opposes the input. Coupling field absorbs energy from mechanical system, converts and delivers electrical energy.
The problem with floating inputs is that electrical noise in the line could trigger the input without user input. This can easily be avoided with a pull-up or pull-down resistor. The problem with floating inputs is that electrical noise in the line could trigger the input without user input. This can easily be avoided with a pull-up or pull-down resistor.
you can not measure the ampres on the cooling capacity of the system. you can only measure ampres on the size of compressor or input kw to air-con. 1.5tons is measuring cooling capacity not electrcity input.