0
the radius
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is chain dimensioning?
It show dimension of given dig. Ex. length meter etc. > chain dimensioning as opposed to datum dimensioning. chain dimensioning: 4 holes in line on a drawing, first hole position dimensioned from the edge, remainder dimensioned from the centre of the previous hole. datum dimensioning: all holes dimensioned from the edge. the cumulative tolerance build up on the chain dimensioning allows for greater overall tolerance build up.
Where sf6 gas is filling in sf6 braker?
Usually in a sealed tank, the switch contacts are in the tank too. The SF6 gas quenches any arcs that form when the switch contacts are opened.
What are the two major differences between a mechanical switch and a transistor?
speedsizeswitch has moving parts, transistor has no moving partsswitch contacts wear out from friction and/or electrical arcs, transistors don'tetc.
What are the different types of geometric constraints that are applied to sketches and what are their functions?
Perpendicular is a constraint that causes lines or axes of curves to meet at right angles.Parallel causes two or more lines or ellipse axes to be equidistant from each other.Tangent is used to cause two arcs or a line and an arc to intersect at a single point perpendicular to the arc's radius.Coincident fixes two points together, or fixes a point to a curve.Concentric causes two or more arcs, circles, or ellipses to share the same center point.Colinear causes two lines or ellipse axes to lie along the same line.Horizontal causes lines, ellipse axes, or pairs of points to lie parallel to the X axis of the sketch coordinate system.Vertical causes lines, ellipse axes, or pairs of points to lie parallel to the y axis of the sketch coordinate system.Equal forces line segments to be the same length and arcs or circles to have the same radius.Fix constrains points or curves to a specific point on the sketch coordinate system.Symmetry causes selected lines or curves to become symmetrically constrained about a selected line.(http://chongher.weebly.com/pltw-blog.html)
Do you need insurance to open welding shop?
It would be an excellent idea. You will be working with powerful welding arcs and open flames as well as large bottles of flammable gases. It would also probably be a good idea to open your business as a limited liability corporation (LLC) to protect you and your family's personal assets. Good luck!
How are negative and positive cylinders dimensioned?
eew..................
What is a instrument used to construct circles and arcs circles in math?
It is "a pair of compasses" - usually called a compass.
What are intersecting arcs called?
They are simply called intersecting arcs.
Can there be congruent arcs on a circle?
Yes, there can be congruent arcs on a circle. Arcs which subtend the same angle at the center are considered as congruent.
Arcs of the same circle or congruent circles that have the same measure?
Congruent Arcs
What is the population of Laroque-des-Arcs?
Laroque-des-Arcs's population is 471.
When was NTT Shining Arcs created?
NTT Shining Arcs was created in 1976.
What is the population of Vilalba dels Arcs?
Vilalba dels Arcs's population is 724.
When was Seven Arcs created?
Seven Arcs was created on 2002-05-31.
Arcs of a circle that have exactly one point in common are called what?
Adjacent Arcs
What are the three arcs of the circle?
Circles have infinitely many arcs, not just 3.
What are two minor arcs that are congruent with corresponding chords?
They are arcs of congruent circles.
