Chevy Silverado
Chevy Trucks and SUVs

How big are the wheels on a 1998 Chevy Silverado?

012

Top Answer
User Avatar
Wiki User
Answered
2013-07-31 10:03:37
2013-07-31 10:03:37

The wheels on a 1998 Chevy Silverado are 288 x 288. The first GMT800 Silverado/ Sierra were released in 1998 as 1999 models. The Chevy Silverado is available with either rear wheel drive or four wheel drive.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


That is what the big fan on the front of your engine is bolted to.

Chevy did not have a 350 in 2001 engine options were 5.3, 6.0. or big block

The Chevrolet Silverado 1500 SS is a pickup truck. Specifically, it is a really big pickup truck. Chevrolet first started manufacturing the Silverado back in 1998.

blow out distributor with air , check timing, or take a big hammer to it.

is it a posi rear end? big difference bteween them for procedure. yeah its positive

No front brake calipers are to big. If you must calipers can be machined down at a big cost.

big wheels are for big people . small wheels are for small people

big wheels because they are good for handling

Well if the 1998 truck bed is 8 feet and the 2008 is a 6.5 feet the answer is no.How big is the 1998 trucks bed and how big is the 2008 trucks bed.You need to measure length and width.

Big wheels of course. They will protect you better from falls over potholes

If you know what you are doing you can put ANY engine that you want in it. Small are BIG block. They will all fit.

The 350 is the small block, and in 1986 it would be GM corporate blue.

A Chevy Silverado will need 16 inch rims. If someone gets another size they will not fit. It needs them this big because the size and weight of the car requires a larger rim.

NO. Rear disc brakes are too big and you have to keep tire height very close or it messes with the computer.

follow the big red wire from battery it goes right to you starter and make sure you disconnect the battery before you go ripping it out, there is no relay on a chevy. it is on the pass. side of the engine on the bottom side.

As big as your wallet can handle. With fabrication, anything goes.

You can purchase Alloy Wheels online from the Big Wheels website. You can also get these wheels from the Alloy Wheels website or from retailers such as Amazon.

Smaller wheels are better for doing tricks, but big wheels are better for riding around.

Huge wheels, small wheels go the far. Big Wheels go smaller distances

Yes they will easily fit the truck as long as you don't go too big on the tire. Make sure you test them before you buy them too.

yes they do there bigger then semi truck wheels also the mall truck has the biggest wheels

Penny wheels are 59mm in diameter. Hardness is 78a.

First you need to get a really really big metal crank, usually looks like a key, to insert into the front of the vehicle... No, no wait, my bad that was a 1903 Chevy Silverado. No, but really, they don't crank. They turn over. And if that's the case, it's probably your starter, you can go buy a Chilton's Auto Manual and do it yourself, or you can take it to your local mechanic.

Quite big. They looked a lot like the wheels on the horse drawn carriages that were used at the time.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.