40mm = 1.575 inches.
Direct Conversion Formula
40
mm
*
1 in
25.4 mm
=
1.57480315
in
40mm is about 1.6 inches. So I guess you could call it a "one point six caliber" bore. But nobody would know what you're taking about. Better to just use the metric measurement on this one.
40 mm is 4 cm, which is about an inch and a half.
2.38189"Direct Conversion Formula60.5mm*1 in25.4 mm=2.381889764in
40 millimeters = 1.57480315 inchesDirect Conversion Formula40 mm*1 in25.4 mm=1.57480315 in
Each inch is 25.4 mm, so just divide by this number.
28 millimeters = 1.1023622 inches, or about 1 3/32"FYI: Google "convert 28 mm to inches"Direct Conversion Formula28 mm*1 in25.4 mm=1.102362205in
6.4 x 40 mm = 256 mm 256 mm ÷ 25.4 mm/in ≈ 10.1 in
32mm is 1.26 inches.
1015mm is 40 inches.
The ball used in table tennis has a diameter of d = 40 mm. Some time ago it was 38 mm. 40mm=4cm, 4cm/(2.54cm/in)=1.575 (rounded) inches
US coins are normally measured in metric units. A nickel is 21.21 mm in diameter and there are 25.4 mm in an inch, so the diameter in inches would be 21.21/25.4 = 0.835 inches
1016 millimetres = 40 inches
According to Red Book specifications, a standard CD is 120 mm (4.75 inches) in diameter and 1.2 mm (0.05 inches) thick
The maximum diameter of a golf ball is 1.680 inches. In professional golf a ball can not weigh more than 1.620 ounces.
0.2556 (rounded)
40 mm = 1.575 inches 40 mm = 4 cm
0.5709"Direct Conversion Formula14.5mm*1 in25.4 mm=0.5708661417in
1.57480315 in Direct Conversion Formula 40 mm* 1 in 25.4 mm = 1.57480315 in
It is about 40 inches (1012 mm).