The RJ31X and line seizure are the materials that are used to connect an alarm system with a phone. The RJ31X jack is used to make sure that the phone lines are connected to each other and a network interface of the alarm system. Line seizure is when the phone lines are merged externally for connectivity purposes.
Your question is far too vague - with no details. You would need to consult the manual for the alarm system to see (a) if such a facility is possible and (b) the steps on how to do it.
Pull out the Fuse for alarm system.
of coures it will connect with a wire
Whatever burglar system you choose, make sure it is connect to your phone line so it can notify authorities when there is a problem. Even the most basic alarm system should have this feature.
In an alarm condition, the siren output is a steady output, rather than a pulsed one. To connect the car alarm system to the car horn, simply hook it up with the relay to switch the horn power.
If the alarm system has an auto-dialler - just program it to dial the mobile in the event of an activation.
It is possible to obtain alarm systems that do this. It might be difficult to modify an existing system to do this if it was not originally designed for that.
You need to install a VoIP phone system with supported fax feature.
you can but, you need to open the siren of your alarm system and disconnect the chip inside. then reconnect that to a voice amp or your stereo, simple as that.
Yes you can put an alarm on a car with no power locks, you can even buy central locking system that you can fit to a car with no power locking system that will connect up to the alarm system. Danny from Bee Mech Mobile Mechanics Find me at www.beemech.com.au
A monitored alarm system can increase a home's value, prevent crime, and provide peace of mind. There are several important things to remember when choosing a monitored alarm system. Most monitored alarm systems communicate through a phone line. Many criminals know this: they will cut a home's phone line before setting off an alarm. If the phone line outside a home is accessible at the ground level, it can be disabled easily. A cellular based alarm system can't be disabled, and will notify the authorities if there is a break-in. Most cellular systems send an instant alert, so the alarm box can't be disabled by criminals.
Yes, you can connect 4 Handsets.
I can only assume that you are attempting to connect 480VAC coil from a elevator to a fire system in order to shunt the elevator. In order to do this you will need a shunt trip breaker rated for this use.