With a fuel pressure gauge connected to the Schrader valve on the fuel rail.
Do a fuel pressure check-no fuel pressure means defective fuel pump-
You will need a fuel pressure guage to check the fuel pump. The pump operates at 13 psi.
Check your fuel pressure. No pressure means the pump is not running or defective. Check for voltage at the pump harness and pump relay. If you have voltage and fuel pressure to spec, then you have some other issue, and the fuel pump is not the problem.
You will need a fuel pressure gauge.
With a fuel pressure gauge.
First check your fuel pressure with a fuel pressure gage. If it is good your pump is good. If you have low pressure it could be a bad pump, dirty fuel filter, or clogged fuel line. If you have no pressure then check to make sure the fuel pump is getting power (12 volts) and that is properly grounded. If it is then either the pump is bad or the fuel filter is completely blocked. But first you may want to check to make sure you have gas in your fuel tank.
cobalt 2006 fuel pressure pump
Fuel pressure pump, gets fuel to fuel injector pump, which pump do you want to check and symptoms?
The fuel pump has a check valve that holds the fuel pressure. The sending unit monitors the fuel level in the fuel tank.
Assuming you have spark, when you turn the ignition key on do you hear the fuel pump run for a couple seconds? If not check the fuses, fuel pump relay and wiring. If you do hear the pump run check the fuel pump pressure, it may have a fuel pressure regulator problem.
Chevy did not use them on there trucks. Check fuel pump pressure, fuel pump FUSE and FUEL pump relay.
check the the pump pressure at the rail