answersLogoWhite
Ask
Auto Parts and Repairs
Oil and Oil Filters
Chevy Silverado
Ford Expedition XLT

How can you get an oil drain plug out if it is rounded off?

9899100
Answer

Top Answer
User Avatar
Wiki User
2015-07-15 21:46:18
2015-07-15 21:46:18

all u need to do is use a pipe wrench, works like a charm!

weld a nut to it that works the best, have done it many times

Hammer and chisel also works well.

ANSWER

hammer and chisel

1
0

Related Questions

User Avatar

Oil drain plug? Turn counterclockwise.Oil drain plug? Turn counterclockwise.

User Avatar

With the engine off and the plug wire off the spark plug, you will need to remove the drain plug on the bottom of the engine. Drain the oil, install the plug and fill with 30w oil.

User Avatar

If oil will not drain from an engine after you remove the drain plug either your engine had no oil in it or you have to take off the oil filler cap to release break a vacuum and let the oil flow.

User Avatar

No, removing the oil filter will only remove what oil is trapped in the oil filter. If you cannot get the drain plug off then you will have to insert a tube down the dipstick tube and pump the oil out. My advice it to take the vehicle to a trusted mechanic and have them remove the drain plug. It can be removed with the proper tools.

User Avatar

The engine oil drain plug is on the bottom rear of the engine oil pan. The transmission does not have a drain plug, you remove the pan to drain.The engine oil drain plug is on the bottom rear of the engine oil pan. The transmission does not have a drain plug, you remove the pan to drain.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.