Auto Parts and Repairs
Chevy Silverado
Ford Bronco XLT
Ford Explorer XLT

How can you override a kill switch on a 1999 Chevy Silverado?

146147148

Top Answer
User Avatar
Wiki User
Answered
2007-02-19 16:14:29
2007-02-19 16:14:29

I had a problem with my 1999 silverado bacause of a faulty fuel pump it was causing my truck to cut off after running for a minute or two. After getting under the truck and listening to the fuel pump whine I was then able to determine that the pump was in need of replacement. The truck runs great now that I have replaced the pump. I didn't know what to do for my truck to get it running right so I replaced ignition coils, control modules, and even straight wired my ignition so the relay's wouldn't cause my truck not to crank properly.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


what does it mean if my brake light is blinking on and off when its pushed down in my 1999 Chevy silverado

I have a 1999 Chevy silverado ls which has automatic dusk to dawn head lights how do you turn them off as the on off switch only works in the daylight

where is my hood latch located on my 1999 Chevy silverado pickup

The lock/tumbler has to be in time with the ignition switch. I suspect it is not.

Yes as long as the 1999 is not a classic model.

Yes they will as long as the 99 is not the new body style.

It should if it is the round body style such as 2001 or 2002.

I have 1999 chevy Silverado z71 wanting to see if a 1994-95 chevy Silverado z71 bed will fit

On the 1999 Chevy Silverado Z71 4WD, the speed sensor is part of a module. It is located next to the transmission housing.

Either the switch was left in the wrong position, or the thing is defective. The dome lights draw enough current to drain the battery overnight.

If you look at the driver's side of the transmission where the linkage hooks to the transmission you will see a switch there. that is it and it is called a neutral safety switch. It is all built in 1 thing now.

it could but you might need to trim the rear a little

Check the bulbs,if not the bulbs you most likely have a bad ground.

how do you replace the wiper motor pulse board on a 1999 Chevy Silverado 2500

The wheels on a 1998 Chevy Silverado are 288 x 288. The first GMT800 Silverado/ Sierra were released in 1998 as 1999 models. The Chevy Silverado is available with either rear wheel drive or four wheel drive.

You can if the 99 is the new body design / nother words the 99 body will look like the 2003 body. In LATE 1999 chevy REDESIGNED all there engines and transmissions and NOTHING will interchange from 1999 down to late 1999 and up.

where is the oil pressure switch on a 1999 chevy surburban

They are supposed to dim try turning the wheel that brightens them up on the dash or the switch itself.

There is none on you truck. These models have a bad track record of fuel pump problems.I have replaced a few of them.

There is no fuel cutoff inertia switch on a GM vehicle.

how do you remove the spider gears in a 1999 chevy siverado?


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.