answersLogoWhite

0

The radiator on a 2002 Toyota Sequoia can be removed and replaced by first draining the coolant. The cooling hoses can then be disconnected, the retaining bolts removed, and the radiator pulled from the vehicle.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you replace radiator on 2002 Toyota Sequoia?

To replace the radiator on a 2002 Toyota Sequoia, start by disconnecting the negative battery terminal. Drain the coolant by removing the drain plug at the bottom of the radiator, then disconnect the upper and lower radiator hoses, along with any transmission cooler lines. Remove the mounting bolts and lift the radiator out. Install the new radiator by reversing these steps, ensuring all connections are secure, and refill the coolant.


How do you replace the thermostat on a 2002 Cavalier 22 Ecotec?

To replace the thermostat on a 2002 Cavalier 22 Ecotec, drain the radiator and remove the upper hose assembly. Replace the thermostat and refill the radiator.


How do you replace the cable in the door handle of a 2002 sequoia?

get a BFH


How do you replace a alternator on a 2002 deville?

you have to remove the radiator and the a/c condenser to pull alternator also cooling fans


How do you replace the water pump on a 2002 Chevy Cavalier?

Drain the radiator. Remove the pump belt. Remove the fan and shroud if needed. unbolt the pump and replace it with the new one. Reinstall the fan, shroud, and belt. Fill the radiator with coolant.


2002 grand am gt radiator replacement cost?

How much does it cost to replace a radiator in a 2002 Pontiac Grand Am


How do you replace the radiator on bmw mini cooper 2002?

To replace the radiator on a 2002 BMW Mini Cooper, first ensure the engine is cool and disconnect the battery. Drain the coolant by removing the drain plug at the bottom of the radiator, then remove any necessary components such as the upper and lower radiator hoses, and the fan assembly if needed. Unscrew the mounting brackets that secure the radiator, lift it out, and replace it with the new unit. Finally, reassemble the components, refill the coolant, and check for leaks.


How do you replace the antenna on a 2002 Toyota Sequoia?

To replace the antenna on a 2002 Toyota Sequoia, first, remove the old antenna by unscrewing it from the base. If the antenna is damaged or stuck, you may need to use pliers or a wrench, but be careful not to damage the base. Next, take the new antenna and screw it into the base securely. Finally, test the radio to ensure that the new antenna is functioning properly.


How do you replace the radiator on a 2002 Hyundai Elantra 2000cc?

I tried to remove my Hyundai Elantra 2002, im having a hard time pulling out the hoses. There is one screw that you have to remove on right hand side of the radiator, just beside those freon connection. I used a very small 10mm rachet.


How do you replace a radiator in Mazda mpv 2002?

To replace the radiator in a 2002 Mazda MPV, start by draining the coolant from the radiator and disconnecting the negative battery terminal. Remove the hoses connected to the radiator, along with any mounting bolts or brackets. Then, carefully lift out the old radiator and install the new one, reconnecting the hoses and securing it in place. Finally, refill the coolant and reconnect the battery before starting the engine to check for leaks.


How do you change the coolant in a 2002 3.8L Camaro?

Remove the drain plug from the bottom of your 2002 Chevy Camaro radiator. Allow the coolant to drain out into a container. When all the coolant is drained out replace the drain plug to its original position. Fill the radiator with new coolant.


How do you replace the radiator on a 2002 cavalier?

To replace the radiator on a 2002 Chevrolet Cavalier, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant by removing the radiator drain plug, then disconnect the upper and lower radiator hoses, and remove any mounting bolts or brackets securing the radiator. Carefully lift out the old radiator and install the new one, reconnecting the hoses and any electrical connections. Finally, refill the cooling system with the appropriate coolant and check for leaks.