I would let the sand settle out of the mixture, then pour off the water, leaving the sand behind. If you needed to extract the remainder of the water, put the wet sand into a centrifuge and spin it until the water is out and collected from the centrifuge.
If you want to separate sand from water take a beaker a pebble and a filter paper then fix the filter paper in the pebble and put it on the beaker and add the mixture of water and sand then the water will be in the beaker and the sand will be on filter paper. Remember use Steve for thick things such as tiny stones etc and apply the same method.
By filtration. Filter the sand from the water using filter paper and a funnel.
By boiling the water so it evaporates
filter it
Place the mixture in water and separate the sand from the water if you want the salt. alow the water to evaporate, and you have salt and sand separated.
to separate the mixture of sand and sugar:- first: you can mix water in it and after mixing you can separate the water and sand. and after that you boil the water until whole water is evaporated and you get sugar and sand separated. second: if difference b/w size of sugar and sand particle you can use met to separate them.
Since salt is soluble in water then you have to separate the mixture from sand first and this is done by filtration. The sand will be left in the filter paper and the filtererd solution would be that of salt and water. To get the salt you would then have to heat the solution and the water will evaporate leaving the salt behind.Filter Paper
First heat the mixture; the iodine will sublime and turn to a vapor which can be collected. Then add water to the remaining salt/sand mixture; the salt will dissolve but the sand will not. Finally, evaporate the water to obtain the solid salt.
water and a magnet
get a strainer to get the sand out silly :)
Place the mixture in water and separate the sand from the water if you want the salt. alow the water to evaporate, and you have salt and sand separated.
we can separate salt and sand by solving the mixture into water salt is soluble but sand is not .
to separate the mixture of sand and sugar:- first: you can mix water in it and after mixing you can separate the water and sand. and after that you boil the water until whole water is evaporated and you get sugar and sand separated. second: if difference b/w size of sugar and sand particle you can use met to separate them.
Not sure what is meant by mixtures? But, the sand and water can be heated to evaporate off the water, which can be condensed back into water. This will leave the sand behind.
Settle it and pour off the water, or simply filter the sand out of the water.
You can filter it or evaporate and condense the water
Put the mixture in water and wait for all of the salt to dissolve. Then filter out the sand and wait for the water to evaporate in the sand/water solution to get the sand and salt separately.
with fillter paper
Anything containing two separate entities is a mixture. Sand and water is a heterogeneous mixture because it is not the same throughout.
Filter the mixture -- sand will not pass thru. Evaporate the water --- sugar will remain.
Filter the sand out, and then evaporate the water, salt is left as dried.