there are 3 ways,
*changing the number of coils of wire,
*changing the current in the wire,
*changing the material used for the core.
sidenote - i just saw this answer and its perfect, really. simple and just the three points i needed for homework!
how could you make them stronger
Additional windings of wire, use a different core or increase the current.
-- Increase the current through the wire coil. (Do that by increasing
the voltage between the ends of the coil.)
OR
-- Increase the number of turns of wire in the coil.
Additional windings of wire, or increase the current.
By putting more coils around it.
Bolt
Either increasing the size of the current (in amps) or the number of turns of wire wrapped around the core will make a stronger magnet. A larger current will make a stronger magnet (up until too much makes the wire melt!). Increasing the voltage forces more current through the electromagnet.
Adding more coils will make the magnetic field stronger. Magnetic field increases.
Electromagnets consist of wire coiled around a core. The core can be anything from air to a nail or even a pencil. Since electrons flow freely through a conductive core (like a nail), an electromagnet made with a metal core will have a larger magnetic field (and thus be stronger) than an electromagnet with a wooden core. The strength of an electromagnet is related to the number of times the wire is coiled around the core and the distance the wire covers across the core. The more coils wrapped closer together, the stronger an electromagnet will be. The amount of voltage running through the wire also plays a role in an electromagnet's strength. More voltage means more electrons moving through the wire and thus a stronger magnet.
The strength of an electromagnet depends on the current through the coil andthe number of turns in the coil. The voltage across the coil doesn't matter at all.So IF both of your electromagnets have the same number of turns in their coils,then the one with 20A of current is stronger than the one with 5A of current.If they have different numbers of turns in their coils, then we need more informationbefore we can decide which one is stronger.
You could either put a bar of iron in the center of the electromagnet, increase the voltage that you put in, or make more loops of wire.
To chew on it.
Adding more turns of wire to the electromagnet will make it stronger without changing the applied voltage.
An electromagnet's pulling force can be made stronger by introducing iron core in it.It increases the magnetic pull.
Yes, if you increase the number of coils or loops in an electromagnet, it's power increases.
The electromagnet is made stronger in proportion to the current given. Refer to the link provided for more information.AnswerWhen current passes through the coil of wire surrounding the core of an electromagnet, it acts to align the magnetic domains within that core. Once all the domains have been aligned, the electromagnet has reached 'saturation' and is as strong as it can get. So the strength of an electromagnet is NOT proportional to its magnetising current.
Neodymium
yes it can
Bolt
Bolt
Not generally, although MacGuyver could make an electromagnet with a toothpick and a spool of wire.
You have to take it out on a nice date first. Second, you have to pleasure the magnet for exactly 42 minutes. Third, you rub tons of ranch dressing all over the magnet on each side and keep it on there for 3-4 hours. These are the steps to make your electromagnet stronger.