You can dissolve the sand and salt into the water. when this happens the salt will be dissolved and the sand will stay at the bottom. then get some filter paper and pour the mixture through it. the dissolved salt and water will go through leaving the sand. there you have the sand aside. to get the salt aside just boil the water until it evaporates completely and you will be left will your salt. then you have your sand and salt separated.
by sifting it
The way to separate sand and salt from a mixture of sand and salt water get a very fine sieve and pour the sand and salt water mixture onto it. The water and salt will flow through and the sand will be trapped. Rinse the sand with clean water to get out the rest of the salt and wash it through the sieve, leaving the sand. Spread the sand out and dry it.
With the salt water "clean" and filtered, use a process to dry it, like evaporation. With the water driven off, all that will be left is salt. The physical processes used in separating these materials are straight forward and easy to understand.
Dissolve the salt, drain the liquid, evaporate the liquid.
Salt and sand can be separated by dissolving the salt in water, filtering the mixture, and then evaporating the water to recover the salt.
Place the mixture in water and separate the sand from the water if you want the salt. alow the water to evaporate, and you have salt and sand separated.
Add water, separate the water from the sand. Let the water evaporate.
Since salt is soluble in water then you have to separate the mixture from sand first and this is done by filtration. The sand will be left in the filter paper and the filtererd solution would be that of salt and water. To get the salt you would then have to heat the solution and the water will evaporate leaving the salt behind.Filter Paper
Sure, that's easy. First, pull out the iron filings with a magnet. Separate the pebbles by pouring the mixture through a grate, with holes large enough to allow the sand and salt to fall through, but not large enough to allow the pebbles to fall through. Finally, to separate the sand and the salt, just add water. The salt will dissolve, the sand won't. If you want to recover the salt in solid form, you can then boil away the water in the salt solution, and get your salt back. Done.
mix the salt and sand into a glass of water. The sand would settle at the bottom of the glass, and the salt would dissolve into the water. pour off the salt water, wait for the water to evaporate, and you will be left with salt, and sand.
we can separate salt and sand by solving the mixture into water salt is soluble but sand is not .
Salt is soluble in water, sand is not soluble; filter the solution.
Place the mixture in water and separate the sand from the water if you want the salt. alow the water to evaporate, and you have salt and sand separated.
water
filtration
Put them in water. Sugar dissolves, sand remains Filter the solution to separate sand and salt. Evaporate solution with dissolved salt to get salt back
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
You can separate them by filtration and it would help because when you add water the sand would stay because you would have to add cold water so that the sand will stay and the salt will go through.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
One direction
yes
Clearly, a magnet will separate the iron filings from the mixture, leaving just the salt and sand. Then you could run water through that to dissolve the salt, leaving just the sand. If you collect the water and evaporate it, you'll be left with the salt.