0
if there is no drainage from the spa the best way is to put a submesible pump into it and pump the water to where ever you want it to go. submersible pumps can be hired from most tool hire places.
If your spa is above ground you can create a siphon using an ordinary garden hose to drain it. For in ground spas you would probably have to have a hill close by, and make sure the water isn't going to drain down the hill into someone's back yard.
What else can I help you with?
How often should you drain and clean a public spa?
When you have a spa used by the public you want to drain it often. The water in the spa should always be clear and clean.
how often should a spa be drained?
A spa should be drained on average every 4-6 months. However, if you are using your spa on a regular basis you should most likely drain it more often. For the best care of your spa you should drain 12 inches of water weekly for regular use.
How do you get in to spa 3 on Moshi Monsters?
there's a tiki torch in the reception, get then go to spa number 1 get the hook on the fish, then use the hooked torch to drain all the water then the key card will pop out then use it to get to spa number 3.
How do you get the spa 3 card on moshi monsters mission 2 series 2?
tiki torch and hook the drain and tap the drain to get spa key card3
Why does the spa water lower when the pool pump turns off and why does the spa water level go down while using the spa if the spa water is approximately 16 inches above pool water level?
The check valve between the spa and the pool is defective.
Is spa water a pure substance?
No spa water is not pure there are other things added to the water
How do you heat your spa without heating your pool?
There should be valves to redirect the water to and from the spa. Ken
How do you plumb in a spa bath?
To plumb in a spa bath, first, ensure you have access to the necessary water supply and drainage lines. Shut off the water supply and connect the hot and cold water pipes to the spa bath's inlet valves, ensuring proper seals to prevent leaks. Next, connect the drain assembly to the bath and ensure it aligns with the home's drainage system, sealing it with plumber's putty. Finally, test the connections by turning the water supply back on and checking for leaks before finishing any surrounding fixtures.
Can you convert a regular spa to a salt water spa?
I would NOT do that unless I were certain that the spa was built and designed to handle the change. Salt water can do serious damage to components that were not designed to withstand it.
How do you get spa 2 cord on moshi monsters?
To get the Spa 2 card on Moshi Monsters, you must retrieve it from the pool. Use a hook to pull the plug from the bottom of the pool. This will cause the card to be sucked into the drain. After being pulled into the drain, it will pop back up, and you will be able to grab it.
Why does a jacuzzi drain?
If your Spa is attached to your pool more than likely your valve actuator is not set in the correct mode.
What are the necessary steps to safely and effectively disconnect a spa?
To safely and effectively disconnect a spa, follow these steps: Turn off the power supply to the spa at the circuit breaker. Drain the spa completely to avoid any water-related accidents. Disconnect the electrical connections to the spa, ensuring all wires are properly insulated. Remove any remaining water from the plumbing lines to prevent freezing. Cover the exposed electrical connections with waterproof caps or tape. Store any removed parts or accessories in a safe and dry place. Consider seeking professional help if unsure about any step in the disconnection process.
