First remove the timing cover , and then remove the Idler, this is the one with the eccentric on it. At the top of the motor you will see a knotch, and on the cam gear you will see a hole, line those up, make sure the crank keyway is straight up, and put it all back together.
what should the compression be on a 2007 ezgo golf cart
2002
There probably isn't a speed control on the golf cart itself, but on its engine. To get more or less speed out of it, you would need to mess with the governor (on the engine itself).
It is not recommended to use blended oils on a 2000 Gas EZGO Golf Cart. The recommended oil to useÊis regular 10W-30 oil.
is there any fuses and where are they located on an ezgo electric golf cart. 90s model
No!
I'd just trace the wires from the alarm itself and disconnect them
has a full charge won't go forward or reverse
add 30" to the wheelbase and you should be close
As soon as lube runs out of the fill hole, it is full.
scroll down on this website, should be everything you need....... http://www.buggiesgonewild.com/electric-ezgo/1536-basic-ezgo-electric-golf-cart-wiring-manuals.html
Most likely the ignition switch is shorted placing it in an on position at all times.