Do you mean fiber cables?
If so, each glass fiber carries a beam of light which is modulated by the information being carried. These days the data is usually binary encoded before being transmitted.
Scientist use a light meter to show how light in shining on a surface !
you use an friction striker to light what?
Endoscopes are made from fibre optic cables which have a greater refractive index than that of their surroundings. Therefore light is refracted away from the normal as it passes from one medium to another. The fibres have to be made of special glass, and each fibre has to be coated with a layer of glass of a different refractive index. At a certain angle, no refraction takes place and the light is only reflected. This is called the 'critical angle'. The light is then said to have undergone the principle of total internal reflection. Close to 100% of the incident light is reflected making it more efficient than the most superior of conventional mirrors. Fibre optic cables use this notion as the light enters the fibre. As it enters it is totally internally reflected until it exits out the other end of the fibre.
no not easily
The best color to use to reflect light rays is white. White is a reflective color. So are most light colors. So white is the best color to use to reflect light rays. :)
Fibreoptic networking is networks wired up with fiberoptic cables firberoptics use light to transmit data
Fiber Optic cables carry data as light.
Fibreoptic networking is networks wired up with fiberoptic cables firberoptics use light to transmit data
In most cars, a service vehicle light can be reset by disconnecting the battery cables for one minute. After the cables are reconnected , the light should turn off.
Cable ties and useful to bundle cables together. Bundling cables together provide safety and organization of the cables. Some ties for cables are designed for a single use.
They use higher quality materials.
You use a welder, not jumper cables!
fiber optics transfer data at the speed of light because that's exactly what is transmitted through them... light. fiber optic cables are thin pieces of glass that transmit light pulses
Fiber Optics uses light to signal on and off with each pulse, copper cables use power frequency, high and low to signal on and off.
Yes, you can certainly use both cables in the same network.Yes, you can certainly use both cables in the same network.Yes, you can certainly use both cables in the same network.Yes, you can certainly use both cables in the same network.
The colour of the electricity cables!
HDMI cables have not ports in a non hd tv so no you should not use them