what tools u need to change a wheel bearing on a vw jetta 2003 jetta diesel
No, you need a press to remove and install the bearing.
how do i change front wheel bearing of kia sorento 2003
Take off the steering knuckle and press out the bearing and hub.Have the new bearing pressed in with the hub and re install the knuckle.
Remove the tire and wheel from your 2003 Chevrolet. Remove the axle end cap. Remove the wheel bearing nut. Remove the wheel bearing in the wheel seal. Reverse the process to install the new wheel bearing.
Get a Haynes repair manual. These vehicles are too complex to treat like old school vehicles.
To replace the front bearing,jack up front and remove the wheel.Remove the brake caliber assembly and pads.The brake caliber guide ,held in place by 2 bolts that is bolted to the hub assembly has to be removed in order to remove the rotor.Remove the 3 bolts which hold the wheel bearing to the hub assembly,from the backside.Remove the 35mm axle nut using an inpact drill or strong arm.Tap the axle out of the assembly and the bearing assembly should come out from the front.
The release bearing on the clutch is at fault. Throwout Bearing, replace the Throwout bearing and check the Fork for Damage.
2003 SATURN L 300 front axle torque spec
This would be a warranty item. Talk with your dealer. If the tires are worn out, they will make you think it is a bearing(s, and you will have went through the expense for nothing.
You can replace both... Bearing or Hub... Bearings are cheaper, but harder to find and replace. Hub assemblies are easier to replace, but slightly more expensive.
I had to replace both front wheel baring on mine. Pontiac issued a quisi-recall...they extended the warranty on them for 80k miles. Mine went at 85k and th edealer was willing to only charge me 50%....what a nice guy!