If you multiply the voltage across a load by the current drawn, the result is the power consumed. Simply put, Volts x Amps = Watts. The theoretical relationship between watts and horsepower is 720 W =1 HP. This would hold good in practice if motors or generators were 100% efficient, but none of them are. A motor that produces 1HP of mechanical work will usually consume somewhere between 750W and 1000W.
The conversion of watts to amps at a fixed voltage is governed by the equation Amps = Watts/Volts for example 12 watts/12 volts = 1 amp for a US example, a food mixer with a 400 watt motor on a 120 volt supply 400/120 = 3.33amps, fit a 5amp fuse
As many as will fit. The limit is usually determined by other factors, such as how many amps or watts are required rather than how many volts.
actually, there is usually a sticker under your toaster. The amount of watts, and volts can change from different companies, and the size of toaster you have. My toaster can fit 4 pieces of toast and it uses 120 volts and 1500 watts
What governs the type of breaker is the voltage and wattage of the heater elements. If the tank is 120V then you would only use one breaker. The size of the breaker you use will depend on the watts of the element. Watts = amps x volts, Amps = Watts/ volts. Once you establish the amperage then size the wire and the breaker to fit. If the tank is 240V the same rules apply only you would use a 2 pole breaker. IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS. If you do this work yourself, always turn off the power at the breaker box/fuse panel BEFORE you attempt to do any work AND always use a meter or voltage indicatorto insure the circuit is, in fact, de-energized.
You need a breaker rated for 10 amps and 250 volts. The breaker must also fit properly in your panel.
120 volts is a standard voltage in US for normal house hold electric outlet. , So you can buy from 0 watts to 1000 watts for 120Volts socket . However the bulb you want to buy depend on the Lamp holder , rating of the socket and where the holder is installed, how much light you need etc . Check the max Watts rating on your socket or Lamp and determine the correct Wattage bulb to use. No one can tell you what wattage bulb to use with out looking at your socket or Lamp. The formula for Watts = Volts x Amps Check out the low wattage Compact Fluorescent Light Bulbs which will consume very low engergy and save money in a long run http://www.energystar.gov/index.cfm?c=cfls.pr_cfls
Gears are wheels with teeth that fit together.
Thay fit together like a jigsaw puzzle
yes they will but you will need measurements to make sure the box or boxes will fit.
If the fuse won't fit then you have the wrong size fuse. They make several different sizes and amps.
They all fit together like a puzzle.
You have to choose the correct themes that will make your posts fit together on your blog.