HOLD Foot Brake on and pull hand brake on and off 5 or 6 times there is also a cable adjuster under centre console remove box at rear to get to it you may need
to service calipers if brake wont adjust hand brake works off front brakes not rear
ajust break shoes on back wheels
relay location citroen c5
change hand brake cable citreon relay
Easy, the adjusting nut is located directly next to the handbrake lever. You simply have to remove the cover to access it. Regards Gary Tetlow
citroen c5 2006 fuel filter location
where is the crankshaft sensor on c5
antipoliation fault citroen c5 2.0 hdi
where is the bung on a citroen c5 gearbox need to top up on oil
To remove the handbrake cable from the front caliper of a Citroën C5, first, ensure the vehicle is securely lifted and supported. Locate the retaining clip or bolt that secures the handbrake cable to the caliper and remove it using the appropriate tool. Once the securing mechanism is removed, gently pull the handbrake cable out of its housing on the caliper. Make sure to check for any damage or wear on the cable before reinstallation or replacement.
Citroen C5 cars are available on sale at many different car dealers. Online, one can find a Citroen C5 on websites like Autotrader, Carpages, and Topdeal.
To adjust the handbrake on a Citroën Xantia, first, ensure the car is on a flat surface and securely lift it using a jack. Remove the rear wheel and access the brake mechanism. Adjust the handbrake cable tension by turning the adjusting nut located near the rear of the handbrake lever until the desired tension is achieved, making sure the handbrake holds the car when engaged. Finally, test the handbrake by lowering the car and ensuring it holds securely on a slope.
To adjust the handbrake on a Citroën Berlingo, first, ensure the vehicle is on a level surface and the wheels are chocked. Locate the handbrake adjustment nut, typically found under the center console or near the handbrake lever. Use a wrench to turn the nut clockwise to tighten the handbrake or counterclockwise to loosen it, ensuring the lever engages appropriately after a few clicks. Finally, test the handbrake to confirm it holds the vehicle securely.