Start at the longest line aqnd work towards the shortest (RR-LR-RF-LF)
Attach a flexible tube to the bleeder screw at the top of the wheel cylinder
Place the other end of the tube into a container filled with clean brake fluid
Have assistant pump brake pedal and hold approx. 2/3 from the top
Loosen bleeder screw
Observe fluid in container for bubbles
Repeat until no bubbles are observed
Proceed to next wheel DO NOT LET MASTER CYLINDER EMPTY DURING PROCEDURE
With years of experiance
to bleed brakes on all vehicles in the right order.you start furtherest wheel from the master cylander then next furtherest then 3rd furtherest then closest
This may help. http://www.stoptech.com/tech_info/wp_howto_bleedbrakes.shtml Y-THINK-Y
If you have a set of them, use the one that fits snugly.
bleed it the same way u bleed the brakes
Tools needed to replace front brakes 2002 Ford Focus?
The 2001 Ford Focus has 16 valves.
how do i change the alternator in my 2001 ford focus?
Where is the coolant temperature sensor on a 2001 ford focus?" Where is the coolant temperature sensor on a 2001 ford focus Where is the coolant temperature sensor on a 2002 ford focus
Yes you can! The Focus SVT model comes with rear disk brakes from the factory and the parts from it will work. There's also a kit from Ford Racing that has all the parts needed to make the conversion. It a fairly straightforward swap and can be done in an afternoon. Look on EBay, they have thousands of part for the Ford Focus, including the disk brake kit.
The 2001 Ford Focus is a gas-powered vehicle.
The 2001 Ford Focus has a 5-speed manual.