answersLogoWhite

0

There is a bleed screw on the thermostat housing. Remove the screw with the engine loose. Ounc you have pure coolant and no air you can close off the bleed screw.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you Bleed the coolant system on a 2002 Chevrolet Impala?

There is a bleed screw on the thermostat housing. Remove the screw with the engine loose. Ounc you have pure coolant and no air you can close off the bleed screw.


Does the 2002 Chevrolet Impala 3.4 engine have habit of leaking coolant?

Yes they do at the intake manifold.


Where is the coolant sensor on a 2002 Chevrolet Impala with a 3.4 engine?

It is on the intake manifold near the thermostat housing.


Problem with low coolant and the radiator on a 2002 Chevy impala?

Fill it up with coolant. If it gets low again I'm guessing you have a hole in your radiator. Replace it.


2002 Honda cr-v How do you bleed air out of the coolant system?

Simply start the engine and let it sit, running, for about 15 minutes. In that time the water pump will have circulated all the coolant in the system and the air in the system (if any) will have migrated to the radiator. Carefully open the coolant cap, relieving the pressure in the radiator and then, if necessary, add coolant and re-seal the system with the proper cap, making sure it is in good condition.


How do you bleed brakes on a 2002 Impala?

To bleed the brakes on a 2002 impala, have a helper pump the brake pedal then hold it down. Open the bleeder valve at one wheel, and let air and fluid flow until the pedal goes to the floor. Close the valve and repeat. When there is no air in the fluid, then move to the next wheel and repeat.


What does service tracking system mean on a 2002 impala?

it's a system which tracks your service needs


2002 grandam 3.4 very poor heat fan is ok?

probably low on coolant, add coolant and bleed system. easiest way is to open coolant hose on top of engine and poor in one end til comes out other (will smoke slightly when you start, its ok, just burning off coolant). or have professional do it.


Where is the engine coolant temperature sensor on a 2002 Chevy impala?

Intake manifold, near the thermostat housing. Should have two wires.


What does abs stand for in a 2002 Chevy Impala?

Anti-lock Break System


Why is your 2002 Chevy Impala overheating?

This is a diagnostic process. If the coolant isn't low and the fan will run when the AC is turned on it will need a Mechanic to Diagnose.


Where are the air bleeder plugs located on a 2002 Saturn cooling system?

The air bleeder plugs on a 2002 Saturn cooling system are typically located near the highest points of the system, such as near the radiator or on the engine block. They are used to release any air trapped in the system to ensure proper coolant circulation. Consult your vehicle's manual for specific locations.