You can either get under the dash and disconnect it, put a piece of tape over it if it bothers you or you can buy and engine analyser for about $69. Most of these have a button on them to shut off the check engine light. If the reason your light is on is because of a service that needs to be done and you did it yourself instead of paying a dealer, it will stay off. If there is actually something wrong, it will come back on when you restart your engine.
An engine cylinder misfire has been detected if your check engine light is flashing on and off
If your check engine light is flashing that means an engine cylinder misfire has been detected
You can't.
Check your sensors.
My check engine light came on after I hit a pothole. What does this mean?
The Check Engine Light (CEL) does not measure oil levels. There will be a specific dash/instrument panel warning light for oil - refer to the Owners Manual for specifics for your year Taurus. See "Related Questions" below for more
Any tampering with an O2 sensor will cause a check engine light. So, you can not bypass.
That is a check engine light. It could be many things but it needs to be hooked to a diagnostic machine to determine what the problem is.
Remove negative battery terminal for 10 mins.
If the check engine light is coming on periodically when hitting a bump in a 1995 Ford Taurus, perhaps a sensor is loose. Check both the oxygen sensors and the speed sensors on the transmission. Also check all sensors in the engine to make sure they are tight.
No, it will cause a check engine light along with fuel economy and power issues.
Run OBD codes to check. It can be as simple as a plugged up PCV.