The easiest way would be to measure it in inches, assuming it's not to tall, if you know the height already then you need to convert it to inches. Example, 1 foot = 12 inches, 6 feet = 72 inches.
Height can be measured in inches.It can be done using inch tape.
height + width + depth = linear Previous answer: 45 linear inches
multiply 12.5;12.5; and 6.25 together
To calculate duct area, multiply the width of the duct by the height of the duct. This gives you the area in inches or centimeters, depending on the unit of measure used for the calculation.
It's not possible to give you an answer without knowing the height of your shadow, because the height of a shadow depends on the position of the light (the lower the longer the shadow is). But if the shadow is exactly the same height as you, it would be the same inches in height as you are. To calculate that, just multiply 5 ft x 12, which = 60 inches, then add the other 3 inches to it. That would give you a total of 63 inches.
Its height is 8 inches
height + width + depth = linear Previous answer: 45 linear inches
You jus multiply the length, hight, and width and put your answer in inches
In the context of a piece of luggage you sum together its length, width and height - each of them measured in inches.
divide size in pixels with size in inches for width or height of photo and you will get resolution
multiply 12.5;12.5; and 6.25 together
You need several quantities to calculate concrete volume for corrugated metal decking. You need both the flute height in inches, flute width in inches, flute foot in inches, sealant depth or thickness in inches, gap size in inches, and deck length in feet.
The height is 14.83 inches.
To calculate duct area, multiply the width of the duct by the height of the duct. This gives you the area in inches or centimeters, depending on the unit of measure used for the calculation.
It's not possible to give you an answer without knowing the height of your shadow, because the height of a shadow depends on the position of the light (the lower the longer the shadow is). But if the shadow is exactly the same height as you, it would be the same inches in height as you are. To calculate that, just multiply 5 ft x 12, which = 60 inches, then add the other 3 inches to it. That would give you a total of 63 inches.
Multiply length by width by height to get volume, then convert to gallons. 216000 in cubed is 935.1 gallons
The volume of that prism would be 224 square inches. To calculate this you do:Multiply base times height (width in your case), this equattion is 7x8=56. Now you have your areaNext multiply the area (which was 56 square inches) by the depth (4 square inches). 56x4=224. Your volume is now 224 square inches (or inches squared)
If you know the height, you can calculate that. Linear inch is a fantasy word from the airliners. It means: X linear inches = length + width + depth (measured in inches).