Want this question answered?
It is the efficiency of the machine.
That's the machine's "efficiency".
nothing has 100% efficiency.
efficiency
string efficiency can not be equal to 100%.. cause...1st of all efficiency of anything cannot be equal to 100%.. Secondly when there is insulators and discs to insulate then there will always be a medium between them.. For which there will be voltage drop... Thirdly there will be a conductor to ground voltage drop... So, string efficiency cannot be equal to 100%
how to calculate the vapour absorption mechine efficiency and per TR steam consumption
how to calculate the embroidery machine capacity and Embroidery factory capacity and efficiency.
Efficiency means to calculate that is the machine is efficient enough to save your bill or use less electricity. To calculate the formula is:Efficiency = Energy output (what is the machine producing) divided by Energy input (what is the machine taking or using).
To calculate the current you need to take theWatt rating of your welder and divide this by the voltage youhave setthe machine at- this gives the amperage. So for a 1440 watt welder running at 12v the current would be: 1440 watt/ 12v = 120 Amps
For efficiency, you have to consider the energy or work that you get out of the machine, compared to the energy or work that you put into the machine. Its what you get out, divided by what you put in. By multiplying the result by 100, you should then get the efficiency expressed as a percentage, which is the normal way of describe how efficient a machine or process is. efficiency = (Work out/Work in) x 100 Sometimes you are given the efficiency in a problem, but then have to calculate either the work out or work in, so then its just a case of rearranging the equation above.
The efficiency tells you how good the machine is. Efficiency equals the power output of the machine divided by the power that is input via a shaft, or via electrical wires, or via fuel. So if the machine has a low efficiency it wastes power and energy, which costs money. The average ordinary automobile has an efficiency of 20-25%. A lot of research work goes into improving that figure.
Work output divided by Work input Times 100
Efficiency is nothing but calculating how the machine is performing for what it has been made for, Efficiency is usually calculated in % as (output/input )X100. for Eg. the Thermal efficiency of an reciprocating gasoline engine can be calculated as follows, Let, the input for an reciprocating engine is 12MJ and its out put is 4MJ then Efficiency is (4/12)X100 = 33%
A welder
A welder is one.
A high efficiency machine will produce more of what is it that you want with the same power as the low efficiency one. In other words, for a low efficiency machine do as much as a high efficiency one, you have to give it more power (energy).
efficiency formula is (Wout/Win)*100% Wout is the work done by the machine is called the output work Win is the work done by you on a machine is called the input work efficiency= useful work output/work input For science, the effiency is: AMA/IMA * 100