Handling and caring for a microscope properly will help prevent safety hazards and keep the machine in good working condition. Always carry a microscope with two hands. Place one hand under the base of the microscope and hold the arm with the other hand. Do not allow the microscope to drop or bump into anything while carrying it. This could damage the microscope or cause small pieces to break off that could cause a tripping hazard. Touching the microscope lens can smudge or damage it. Always use lens paper or a soft cloth with a small amount of isopropyl alcohol to clean a dirty microscope lens. Remove slides and cover slips from the stage before storing the microscope, and rotate the nose piece so that the smallest power objective is facing the stage. Place a dust cover over the microscope when storing it to prevent dust and dirt from damaging the machine.
You hold it firmly by the 'Arm' and 'Base' and when walking with it it should be held near your chest... :)
You carry it with one hand on the base of the microscope and the other hand on the arm of the microscope. You must be careful with it too.
Turn the microscope off
An arm of a microscope supports the microscope you would carry a microscope by holding the arm and putting the base in the palm of your hand.
by clening it
you should carry rest against you not all over the placeIf you do not understand the top answer this may be of uses to you!!AnswerThe microscope should be carried with one hand under the "Base" and the otherhand holding the "Arm".
should carry carefully and with care
why is it important that the lungs are able to carry out their function properly?
so you do not break it.
You should hold the arm and the base of the microscope.
state 2 procedures should be used to properly handle a light microscope
So you don't drop it :)
base