It's not as easy as it should be. This is how I did it. Pop the trunk lid. You will see one or more black knobs in the area of the tail light assembly holding the interior surface. Unscrew the knob closest to the tail light assembly. You will see also a plastic strip running along the latch sill. It is held in place by four plastic screws. These work like anchor screws for drywall. First unscrew the screw and then pop out the screw housing. I removed all four. You might get by by removing the two closest to the tail light.
Pull the interior wall away from the tail light assembly. There will not be a lot of room and you want to pull the interior away just enough to get your hand behind it. Locate the blown bulb/s and twist the bulb holder. It will come free with the bulb. The bulbs are friction fitted, just pull out of the fixture.
Assembly is the reverse of this.
How do you change front signal bulb on 2000 acura RL
Look in the trunk, there is cover for the brake light, remove and you will have access to change the bulb.
Change the whole headlamp bulb. Should be a H4.
There is no light bulb in that can be changed, you have to change the entire panel. Only the agents carry the panel.
Inside bumper back of it
How to replace fog light bulb for acura rl 2002
bulb(s)
uncase, unscrew old bulb, screw in new bulb, put case back on
change bulbs in gear selector of 2001 oldsmobile aurora
how do you replace the bulb of a volvo v70xc 2001 side mirror?
Pull the switch and change bulb in rear. 1 for night light and 2nd for fog light indicator.
It is very easy to change the license plate bulb in a 2001 Dodge Intrepid. You will need to remove the tag and then unscrew the light cover. After the cover is off, unscrew the light and replace with a new one.