In order to change the water pump the first step is removing the grill and then the radiator fan assembly. Once this is done the water pump is accessible it will have four bolts that must be removed in order to take out the water pump.
Is the fuel pump for a 1994 Geo Tracker in the gas tank
ask yourself this question is your tracker over heating? if you said yes you may need water pump, thermostat, and engine coolant :)
take it to a mechanic.
replace water pump on a 1994 rodeo replace water pump on a 1994 rodeo replace water pump on a 1994 rodeo replace water pump on a 1994 rodeo 6 cylinder
Either the pump bearings are bad or the ac clutch is going bad. The clutch can be replaced but the pump bearings are not generally cost effective to change.
Remove the serpentine belt. Drain the water from the radiator. Remove the radiator hose from the water pump. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
2dr, 4wd, convertableIs the fuel pump
The water pump should be along the serpentine belt. Refer to how to change a driveline belt at this site. The water pump should be located to the right(driver side) of the vehicle and it should be at the highest position on that side.
The water pump on a 1994 Chrysler Concord is changed by removing the engine accessories, disconnecting the radiator hoses, and unbolting it from the engine block. The surface is then cleaned, a new gasket installed, and a replacement water pump mounted.
diagram of where the water pump is located on 1994 acura legend v6 diagram of where the water pump is located on 1994 acura legend v6
Answering "How do you replace the water pump on a 1994 Toyota Camry?"
No, you do not have to replace the timing belt at the same time as the water pump. It is highly recommended because there is no additional labor involved since the timing belt must be removed to replace the water pump.