place a 15 mm spanner on the tensioner from under the car and rotate it clock wish to lift the tensioner then you can remove the belt
If it's the 2ltr diesel it has an automatic spring loaded tensioner mounted down below the alternator. A bit tight for space down there if you need to change it.
The Range Rover 220 Turbo diesel cam belt should be changed every 60,000 miles. If you do not change the cam belt and have a problem the warranty may be void.
what year diesel what size diesel if it is 7.3 powerstroke, u remove serpentine belt next you unplug wire harness from back of alternator then you remove 2 bolts that hold alternator to engine lift alternator off installation is exact opposite easiest alternator to change out
Dead easy, take drive belt off power steering pump. Slacken off alternator's two 13mm nuts, push down on spring loaded alternator, take off alternator belt, put on alternator belt. Reverse process. Job done
To change the alternator on a Vauxhall Combo van diesel, first disconnect the battery to ensure safety. Remove any obstructing components, such as the drive belt and any brackets securing the alternator. Unplug the electrical connections from the alternator, then unbolt it from its mounting. Install the new alternator by reversing the removal steps, ensuring all connections are secure and the drive belt is properly tensioned.
To change the alternator on a Land Rover Discovery 2, first disconnect the negative battery terminal to ensure safety. Remove the serpentine belt by releasing the tensioner, then take out the electrical connections and mounting bolts from the alternator. After removing the old alternator, install the new one, reconnect the electrical connections and bolts, and then reassemble the serpentine belt before reconnecting the battery. Finally, start the engine to ensure the alternator is functioning properly.
Cam Belt
how do you change 2004 kia sorento alternator belt
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
Loosen the tensioner pulley to remove the belt. Remove the wiring harness. Remove the retaining bolts. The alternator will come off and can be replaced with a new one.
no it doesn,t have a timing belt or chain.
Chain