0
first of all you have to remove the y exhaust pipe secondly starter thirdly remove the bolts which connected to the transmission and the chessies,after that remove all pan holding 8mm bolts around, finally pull down the pan( pulling down is not eazy) the gas ket selent is very hard you have to fight like we fought to catch ossama.
What else can I help you with?
How do you change the oil pump on a 1996 Windstar with a 3.8 motor?
The oil pan must be removed to gain access to the pump.
How do you change the transmission oil pan on a 1996 ford windstar?
Since you have to drop the pan in order to change the filter, follow the instructions in the "Related Question" below...
How do you change the oil pan on a 2003 Chevy Malibu?
Drain the oil from your 2003 Chevy Malibu oil pan. Remove the oil pan retaining bolts. Remove the oil pan gasket. Put a new gasket on the new oil pan and reverse the process.
How do you change the oil pan on 2003 Chevy cavalier?
what parts do i have to take off, to take off the oil pan on a 2003 chevy cavalier
How do you change transmission oil in 2003 passat?
you need to drop the transmisison oil pan,
How do you change oil pump in 2001 ford Windstar?
To change the oil pump in a 2001 Ford Windstar, start by disconnecting the battery and draining the engine oil. Remove the oil pan by unbolting it, which may require removing exhaust components or cross members for access. Once the pan is off, unbolt the old oil pump from the engine and replace it with the new one, ensuring proper alignment and sealing. Reassemble the oil pan and refill the engine with oil, then check for leaks after starting the engine.
Where is the 1998 Ford windstar oil pan?
On the underside of the engine.
Where is oil pan on 2003 Volkswagen Passat?
metal pan is the oil pan on 2003 Volkswagen Passat.
How do you change oil pan gasket on 2003 foud turaus?
put it on the plug
Where is the oil pump on 95 ford windstar?
The oil pump is bolted to the bottom of the engine block INSIDE the oil pan on a 1995 Ford Windstar V6 engine
Where do you change the transmission fluid in a 2003 Jeep liberty?
Remove transmission oil pan
How do you change an oil pan gasket on a 2003 Pontiac aztek?
To change the oil pan gasket on a 2003 Pontiac Aztek, first, ensure the engine is cool and disconnect the battery. Drain the engine oil and remove any components obstructing access to the oil pan, such as the exhaust or crossmember. Remove the oil pan bolts and carefully detach the oil pan from the engine, clean the mating surface, and replace the old gasket with a new one. Reinstall the oil pan, torque the bolts to the specified settings, and refill the engine with oil before reconnecting the battery.
