answersLogoWhite
Brake Pads and Rotors
Chevy Suburban
Chevy Trucks and SUVs

How do you change brake shoes on a Chevy Suburban?

515253

Top Answer
User Avatar
Wiki User
2015-07-15 21:09:52
2015-07-15 21:09:52

if you need to ask just take it to midas

1

Related Questions

User Avatar

Remove the tire and wheel from your 2002 Chevy Malibu. Remove the brake spring and the brake caliper. The brake shoes will come off. Reverse the process to install the new brake shoes.

User Avatar

do I need brake pads or brake shoes for 1998 Chevy tracker

User Avatar

If you want them to work properly, take it to the nearest Chevy dealership.

User Avatar

It your unfamiliar with basic brake work purchase a shop repair manual for that vehicle. It will save you time and money.

User Avatar

Remove the tire and wheel from your Mitsubishi. Remove the brake spring and the brake caliper. The brake shoes will come off. Reverse the process to install your new brake shoes.

User Avatar

you go to a liscenced garage, where they are qualified to do repairs on safety related components... period...

User Avatar

Is there a special tool that is needed to remove and replace the brake shoes?

User Avatar

what tools i need to change the brake shoes for a cavalier 2003

User Avatar

need help installing brake shoes need diagram

User Avatar

Begin by removing the tire and wheel from your 1993 GMC. Remove the brake spring and the brake caliper. The brake shoes will come off. Reverse the process to install your new brake shoes.

User Avatar

The truck has 4 wheel disc brakes for stopping. There is a small hub on the rear disks for the parking brake shoes to engage. www.trailvoy.com

User Avatar

If your brake shoes are squeaking you need to take it to the nearest expert technician or mechanic which will tell you how to change your shoes and if you need to.

User Avatar

how to remove and fit rear brake shoes on a peugeot 206 1.1

User Avatar

Just beginning to check out noise on our '01 Suburban 1500 (270K miles). Several threads say this noise is due to a faulty spring clip holding the parking brake shoes. Supposedly this is the part number for the GM/Chevy solution (I haven't checked this P/N at the dealership yet, just quoting a TSB someone posted). P/N 88982879 parking brake retaining spring clip kit You have to remove rear wheel, unbolt brake calipers, remove hub, and then replace parking brake spring as well as parking brake shoes if they are worn. Best wishes! Steve Atlanta, GA

User Avatar

Remove the tire and wheel. The brake shoes are held in place by a spring. Remove the brake shoe spring. The brake shoes will come off. Reverse the process to install the new brake shoes.

User Avatar

The truck has 4 wheel disc brakes. The parking brake uses the hub on the rear rotor with a small set of brake shoes inside for use as a park brake only. www.trailvoy.com

User Avatar

The brake rotors are warped are out of round. Need to do a brake job and have the rotors turned are replaced. Be sure to install new pads and shoes.

User Avatar

Its got disc brakes in the front, therefor brake pads and its got drum brakes in the back, therefor brake shoes

User Avatar

Remove the tire and wheel from your Chevrolet Avalanche. Remove the brake spring and caliper. The brake shoes will come off. Reverse the process to install the new brake shoes.

User Avatar

To change wheel cylinder on a 2000 Chevy Malibu, jack up the vehicle and remove the tires, brake drums and brake shoes. Spray the hydraulic line and fitting with CRC 5-56 and loosen hydraulic fitting. Remove the two mounting bolts and remove the wheel cylinder. Replace with new.

User Avatar

Start with an inspection and adjustment of the parking brake shoes by removing the rear brake rotors. If the brake shoes are good and they are adjusted up and you still need more adjustment, make final adjustments on the brake cables under the drivers side of the vehicle.

User Avatar

rear brake shoes are pretty much the same on all cars and truck. basically you remove the tire remove the brake drum retaining clips. unadjust the brake adjuster. this is doen by removing the plug on the back of the brake backign plate. then turn the star to let the brake shoes back off from the drum. once the pressure is off the shoes the drum will come off. then you remove the shoes by taking off the springs and stuff that hold the shoes on. putthe new shoes on and the drum. readjust the brakes with turning the star the other way. spin the drum to see if they are free or stuck if they are stuck you went too much. unadjust them to get them to where they barely rub. and you are done.

User Avatar

Remove the tire and wheel from your 2003 Chevrolet Astro Van. Remove the brake shoe spring and caliper. The brake shoes will come off. Reverse the process to install the new brake shoes.

User Avatar

To change the brake shoes, remove the tire, rim and axel after you have the car lifted. You can then go on to remove the old brake shoe and replace it with a new one.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.