Pull the engine and disassemble it into nothing. Dont take offense, but if you have to ask about this one, you haven't got the necessary skills to do it. Engine disassembly/reassembly is tricky buisness if you aren't confident of what you're doing.
A connecting rod connects the piston to the crankshaft - A piston rod (also called a wristpin)connects the piston to the connecting rod.
Rod bearing (short for connecting rod bearing) Is the bearing where the connecting rod is attached to the rotating crankshaft.
Connecting rod journals are the part of the crankshaft where the connecting rods attach to. There is one rod journal for each piston/connecting rod in the engine. These journals have a machined surface so the connecting rod bearings can move smoothly as the crankshaft rotates.
no it is not a simple matter.
The connecting rod has a "wrist pin" which goes through the side of the piston and through the connecting rod. It is one of the most critical fit parts of an engine.The connecting rod or con rod connects the piston to the crank or crankshaft!!!
what is the main and connecting rod for a gmc 2.2l
The connecting rod has a "wrist pin" which goes through the side of the piston and through the connecting rod. It is one of the most critical fit parts of an engine.The connecting rod or con rod connects the piston to the crank or crankshaft!!!
80
Any damage on a connecting rod means it must be replaced!!!
You need a hydraulic press to press the pin into the piston and through the connecting rod
11/32 Connecting Rod 38-44 3/8 Connecting Rod 40-45
The connecting rod caps can lock up the motor if they are installed backwards. This makes it important to mark the connecting rod caps when removing them to prevent this problem from happening.