can you change the reflectors on a 2007 vectra
remove dashboard and replace 2 bulbs behind it
you have to remove the cover of the dashboard to replace the light bulbs
you can have a complete walkthrough how to with photos on http://www.vvoc.com
Changing the instrument panel lights require removal of the dashboard. With the dashboard removed pull the gauge cluster out and take off the bulbs. Install the new bulbs.
hi , try www.crazyleds.co.uk, Ive got mine dash on 03 vectra done nicely ;-) chers
look on the vectra forums
u must unscrew spedo facia then you will see more screws there is two different sizes of bulbs
Remove ALL dashboard screwscarefuly remove the dashboard,andyou will see were the bulbs are located,replace any/and/or/allthe bulbs needed,and reverse theprocedure to reinstall ! That's it !
2 ways to change the color the lights show. 1. is to change the bulbs to desired color. 2. Change the gauges faceplate's.
This is a tedious job and static electricity can ruin the printed circuit. TAke it to a garage.
The dashboard lights on a 1997 Eagle Talon can be changed by reaching up into the dash to get to the bulbs. Another way is to remove the dashboard screws and remove the front of the instrument panel.
Citroen xsara Picasso dashboard light bulb is the bulb that's for the dashboard light climate control. The you tube web site gives you information as how to change the bulb.
how to change antifreeze in vauxhall vectra B
Begin by removing the instrument panel cover from your 2002 Pontiac Montana. Take hold of the dashboard lightbulb, push in and turn at the same time. The dashboard lightbulb will come out. Reverse the process to install your new dashboard lightbulb.
What model of Corolla ? You have to take the dash board out and the bulbs can be removed and replaced from the back. The dashboard on the Corolla is not that difficult to take out, but you have to do it slowly and carefully.
We had to go to the dealer who said we wouldn't be able to it ourselves. It cost £30.00 including labour
remove the dashboard, and u will see the lights behind it
i would suggest that you go and buy a Haynes workshop manual from Halfords as it tells you what to do and has pictures that help, i have changed the bulbs on my vectra and without the book i would not have had any idea where to start.
there are three on my vectra c 2002 1 is in the engine bay on the left and 1 in the passenger side of the dashboard and one in the boot
Hi, I'm no pro mechanic but assuming that you have a vectra B, i have had to replace the headlight bulbs on mine and i believe that you require; 1x pair of H7 bulbs (Dipped beam) 1x pair of 501 bulbs (Sidelights) 1x pair of H1 bulbs (main beam) NB: Not all vectras take the H1 bulbs, mine does not anyway so i have 4x H7 bulbs, but of course i think this depends on the type of bulb holders your vectra has. P.S check out this link: http://www.autobulbsdirect.co.uk/bulb/bulb_master_300 0.php?
Try this. http://ww2.justanswer.com/uploads/IBTechSupport/2009-03-23_224709_Mondeo_Cluster.pdf Regards Graeme from Scotland
should be 1 on left hand corner of dashboard in corner of window! If you have a vectra B its on the panel in the drivers door a black sticker with white writing