door hindge... barret
Hey Lee==Simply remove the hindge bolts and remove the door. Some are welded on and you sometimes can remove the hinge pins. GoodluckJoe
You can replace the locking cylinder, on your 1994 Ford Thunderbird, by removing the inside door panel. The locking mechanism will be visible with the door panel removed.
orange anymore than that well than you are screwed
need to replace door hindge pins and bushing,how do we get door off safely.
jack the door up on the end of it and unbolt the hinge and replace with the new one.
First: learn to spell Second: ask again
For a 1994 Ford Thunderbird : ( 3.8 liter V6 engine , automatic transmission ) ( 17 city / 24 highway , miles per U.S. gallon ) According to a website I was looking at
you got to drill out the rivets from the outside and that's about it then there is a clip on the inside that you need to unhook to do that you need to remove the door panel that's it
take the door panel off and spray some lube on the tracks that worked on mine.
The Ford Thunderbird door should trigger the lights to go off. The sensor associated with the closed-door may need to be replaced.
yes most MN12 Ford Thunderbird/Cougar parts as far as body will interchange
the door ajar switches are part of the door latch assembly in the door
Yes, body parts are interchangeable for 1961-63.
You can use a "Jimmy" tool to open the door. The same way a Tow Truck Driver (or a thief) would do it. After you unlock the door with the Jimmy, use the Jimmy to reach the door handle and move it until it opens. Good luck!
the door panel has a few clips on it that just snap in
How do you change the door hinge pins and bushings on a 2002 GMC 1500 pickup truck?"
When i bought my thunderbird the key to the ignition didnt fit the door locks so i had to replace the locks. That might be the best answer. :]
u have to grind the hinges
Door lock fuse is the same as the interior light fuse its a 10amp fuse
on my 93 u press door unlock on remote or with door open use door lock switch to lock doors close the door
that depends whats wrong with it and your mechanical skills
On The AC Case Inside The Dash
You cannot change the master code. You can add other codes, but you cannot change the master....
You have to replace the whole hinge assembly, they don't make a hinge pin kit for the Thunderbird.